ER605v2 + OC200v2 Connection loss problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605v2 + OC200v2 Connection loss problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605v2 + OC200v2 Connection loss problem
ER605v2 + OC200v2 Connection loss problem
2023-02-02 09:52:03 - last edited 2023-02-17 02:10:44
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.1

Hi

I have a problem with the cooperation of Router ER605v2 and OC200v2

After the latest update of ER605v2 to version 2.1.1 released on January 30, 2023.

There were two problems. 1. OC200 keeps disconnecting. OC200 disconnects then

reconnects after a few minutes. OC200 has Firmware 5.7.6 2.

Despite the update of ER605v2 to the latest version 2.1.1, it did not want to work

correctly with the addresses 192.168.10.1/24.

The network set in this way caused that after the restart, the TL-SG2218 switch was

assigned the default address 192.168.0.1. I dealt with this problem by giving the network

the address range 192.168.0.1/24, now there is no such problem.

However, DHCP still malfunctions. Despite entering static addresses for devices, they

still receive random IP addresses. The entire network is rebuilt. All static IP addresses re-entered.

To be honest, it's a bit nasty.

Since I connect an ordinary router for 70 Euro, TP-Link EX53 and he has no problem with

assigning DHCP addresses or IP addresses. And I connect equipment worth at least 180 Euro

and I always have problems with it that you are unable to fix.

 

Dissatisfied customer.

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605v2 + OC200v2 Connection loss problem-Solution
2023-02-17 02:10:40 - last edited 2023-02-17 02:10:44

Dear @sadaman,

 

I'd like to update the post with a solution here.

 

TP-Link has released the official firmware 2.1.2 to fix the DHCP issues.

ER605 V2_2.1.2 Official Firmware (Released on Feb 14th, 2023)

 

You may take your time to upgrade the 2.1.2 firmware and confirm the DHCP issue you encountered has been resolved.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:ER605v2 + OC200v2 Connection loss problem
2023-02-03 08:24:29 - last edited 2023-02-03 08:35:51

Dear  @sadaman 

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. 

The ticket ID is TKID230205251, please check your email box and ensure the support email is well received. Thanks!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:ER605v2 + OC200v2 Connection loss problem-Solution
2023-02-17 02:10:40 - last edited 2023-02-17 02:10:44

Dear @sadaman,

 

I'd like to update the post with a solution here.

 

TP-Link has released the official firmware 2.1.2 to fix the DHCP issues.

ER605 V2_2.1.2 Official Firmware (Released on Feb 14th, 2023)

 

You may take your time to upgrade the 2.1.2 firmware and confirm the DHCP issue you encountered has been resolved.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#3
Options