OC200 Hardware controller does not see the router ER7206 as a gateway even

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 Hardware controller does not see the router ER7206 as a gateway even

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 Hardware controller does not see the router ER7206 as a gateway even
OC200 Hardware controller does not see the router ER7206 as a gateway even
2023-03-16 19:26:00 - last edited 2023-03-16 19:28:32
Model: OC200  
Hardware Version: V5
Firmware Version: 2.7.7

My OC200 Hardware controller does not see the router ER7206 as a gateway , it is connected to the controller but is not seen as a gateway , my network is 10.1.5.1-10.1.5.255 mask 255.255.255.0   GW 10.1.5.251 -- ER7206 ,  is working but no gateway statistics and when I activated the UPNP service it has an exclamation sign and says gateway required !!!

What should be the problem ?

How to instruct omada controler OC200 to see the router ER7206 as a gateway ?

I set the lan to 10.1.5.251/24 in settings LAN of the controller 

I set the ip of the OC200 controller static as 10.1.5.18 netmask 255.255.255.0 gw 10.1.5.251 dns 10.1.5.251 dns secondary 8.8.8.8

 

Thank You in advance 

 

 

 

 

 

 

 

  0      
  0      
#1
Options
3 Reply
Re:OC200 Hardware controller does not see the router ER7206 as a gateway even
2023-03-16 19:42:18

  @Horea74 

 

Do you have a WAN port on the 7206 defined and able to reach the internet?  It looks like you might just have the LAN port locally connected...so it isn't really a gateway...

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:OC200 Hardware controller does not see the router ER7206 as a gateway even
2023-03-17 04:00:04 - last edited 2023-03-17 04:04:53

  @d0ugmac1 

 

Of course I have WAN conected on the WAN port , the netwtork is operational internet is working but it is not seeing as a gateway the controller ...

 

  0  
  0  
#3
Options
Re:OC200 Hardware controller does not see the router ER7206 as a gateway even
2023-03-17 06:59:50

Hi @Horea74 ,

 

You may Edit the Internet Capacity on the Dashboard page to give it a shot, check this out:

 

 

You may refresh the page and try different web browser, especially the incognito windows, sometimes, clear history and cache will help, too.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options