Business Community > Routers > TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
< Routers

TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-05-29 13:41:49 - last edited 2023-05-29 13:46:28
Tags: #Load Balancing #VLAN & Multi-Networks
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.3.0

We have a second wan connection which we want to connect for load balancing.

I have setup the second wan port as i did with the first one however i am required to use vlan ID 10 in order for it to work (same as first connection - both eir fibre)

 

Unfortunately i cannot seem to do this. Apparently a work around would be to have a smart switch between the second connection and setup vlan tagged and untagged ports?

 

Is this the ONLY solution at present? If so, how do i do this from within OMADA?

 

If i try to crete the VLAN under CREATE NEW LAN > VLAN > It tells me the vlan already exists as its configured on the original PPPOE connection

 

 

  0      
 
  0      
 
#1
Options
9 Reply
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-05-29 15:14:54 - last edited 2023-05-29 15:16:46

I dont think there is anyway with a TPlink router, let alone under Omada control to do this natively.

 

One option would be to put your second connection on VLAN11 say, and insert a managed (but not by Omada) switch to remap that back to VLAN10 before it hits your modem.

 

Can you use the existing 2nd modem in router mode and just fix the ip of router's WAN2  and then make it the DMZ?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-05-30 20:07:53

  @d0ugmac1 

 

thanks for response. Tplink official support advised this cannot be done with the current controller firmware but haven't provided any further assistance yet.

 

I will attempt your first suggestion as this has also been mentioned under previous threads it seems. I have a spare managed tplink switch I can try with. Is it simple enough?

 

"Can you use the existing 2nd modem in router mode and just fix the ip of router's WAN2  and then make it the DMZ?"

 

im unsure about this..if it is possible it's beyond my understanding. 

  0  
  0  
#3
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-05-30 21:49:32 - last edited 2023-05-30 21:51:21

  @BUrrenAtlantic 

 

Ok, let us go with the more comfortable option for you.

 

Set up your router's WAN2 with the PPPoE credentials your provider needs, but leave it untagged.  Connect WAN2 to port1 of your managed switch.  Port1 will be configured with a PVID of 10 (or whatever is needed) but untagged.  Configure Port2 as VLAN10 (or whatever is needed by your ISP and TAGGED), I would initially make the PVID of Port2 a VLAN other than 10, 1 will work just fine--this will keep untagged traffic from hitting your router.  Connect Port2 to your modem.

 

Now what happens is untagged traffic appearing on Port1 will enter the switch as belonging to VLAN10.  That traffic will be forwarded to Port and get TAGGED as VLAN10 before it hits your modem.  The reverse path will accept tagged traffic but untagged it before it hits your router.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#4
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-05-31 00:24:44
you have to untag at least one of the connections, your isp-provided box most likely has this option somewhere, it usually does not say "untag vlan" but says passthrough, pppoe passthrough or if you have fiber it may come in omci-like-speak port mapper, port remapping, whatever. if that does not help, buy the chepastest smallest managed switch you find here and do the untagging there.
  0  
  0  
#5
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-06-02 14:37:05

  @d0ugmac1 This has done the trick. Much appreciated thanks.

  0  
  0  
#6
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-07-19 00:41:55
The latest 5.11 controller provides support to reuse VLAN ids on different WAN ports.
<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#7
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-07-19 16:19:42

  @d0ugmac1 

 

I had a response from an engineer advising it would be available in the next update so this is good news.

 

is it available now?

 

im using an OC200 with version 2.9.3

 

when I check update availability it says I have the latest firmware.

  0  
  0  
#8
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2023-07-19 19:11:02
The current Windows version of the controller has it, you'll need to wait for the 5.11 or 5.12 version for the OC200.
<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#9
Options
Re:TL-ER7206 - Two WAN PPPOE connections on same VLAN ID error
2024-01-05 08:27:05

  @BUrrenAtlantic 

New firmware files for omada routers have been released. With the new firmware the same vlan id can be used. For example, I have an ER8411 v1 device and after the latest update, I can use 4 pppoe with the same vlan id on the omada router.

 

When I checked on the support page, this feature was also included in the firmware update for your device.

 

For my device ER8411 V1, the same vlan id feature is provided with V1_1.2.0 firmware.

 

omada router firmware changelog

 

 

 

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 1291

Replies: 9

Tags

Load Balancing VLAN & Multi-Networks
Related Articles
ER7206 Trunk Vlan with TL-SG108E
1645 0
 TL-ER7206 - two WAN with same subnet (and even IP address)
1556 0
PPPoE failing SFP WAN. Internet VLAN disabled in advanced option after ER7206(UN)_V1_1.3.0 upgrade
1178 0
Open wan ports TL-ER7206
946 0
ER7206 change WAN/LAN port to a WAN port
284 0
 TL-ER7206 Maximum VLAN and DHCP POOL
1168 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.