This Article Applies to

EAP223(EU) V2.0

EAP225(US) V3.0

EAP225(EU) V3.20

EAP225(EU) V4.0

EAP225-Outdoor(US) V1.0

EAP225-Outdoor(EU) V3.0

EAP230-Wall(EU)  V1.0
EAP235-Wall(EU/US) V1.0

EAP223(EU/US) V1.0

EAP245(US) V4.0

...

EAP610 v1.0 /v1.6 (EU/US/CA)

EAP610 v2.0 /v2.6 /v2.20 /v2.26 (EU/US/CA/JP/EG)

EAP610 v3.0 (EU/US/CA/JP/EG)
EAP613 v1.0 /v1.6 (EU/US/JP)

EAP615-Wall v1.0 /v1.6 (EU/US/CA/JP/EG)

EAP650-Wall v1.0 (EU/US)

EAP655-Wall v1.0 /v1.6 (EU/US/CA/JP)
EAP650 v1.0 /v1.6 /v1.20 /v1.26 (EU/US/CA/JP)

EAP653 v1.0 /v1.6 (EU/US/CA/JP)
EAP670 v1.0 /v1.6 /v1.20 /v1.26 (EU/US/CA/JP)

EAP620HD v2.0 (CA)

EAP620HD v2.0 /v2.6 /v2.8 (EU/US/JP)

EAP620HD v3.0 /v3.6 /v3.20 /v3.26 (EU/US/CA/JP/EG)

EAP610-Outdoor v1.0 /v1.6 /v1.20 /v1.26 (EU/US/CA/JP/EG)EAP650-Outdoor v1.0 /v1.6 (EU/US/CA/JP/EG)

EAP680 v1.0(EU)

EAP683 UR/LR v1.0/1.6(EU/US/CA/JP)

...
*More EAP Firmware for Omada SDN Controller v5.9 will be provided soon, stay tuned!

 

Release Notes

 

New Feature/Enhancement

 

1. Added support for the following new features which were added on Omada Controller v5.9.

• Added support for shared bandwidth while using the "SSID Rate Limit" feature.
• Added support for IPv6 ACL/URL Filtering/Guest Network.
• Added support for IPv6 dial-up/Client address acquisition/MLD to unicast.                                       
• Added support for LLDP (Link Layer Discovery Protocol).         
• Added support for the Network Check.

Select an Omada EAP and perform a ping or traceroute test to check the network connectivity.                                    

• Added support for Packet Capture. 

Select an Omada EAP, set the capture filter, and perform a packet capture for troubleshooting. Omada Controller uses TCP port 29815 to download the packets.

• Added support for Terminal.

Select an Omada device (EAP or Switch), open Terminal, and then you can execute CLI or Shell commands. Omada Controller uses TCP port 29816 to create remote control terminall sessions with the devices.

• Added support for downloading device info.

Omada Controller uses TCP port 29815 to receive the information from the devices. You can download a device's info by opening its Properties window, going to Config > Manage Device, and clicking Download. This feature helps to confirm the operational status of Omada devices and to perform troubleshooting.

• Added support for the "Lock To AP" feature.

Open a client's Properties window, go to Config, enable the function, and select one or multiple EAPs, then the client will be locked to the selected EAPs. This feature helps prevent a static client from roaming frequently between multiple EAPs.

• Added support for RADIUS username report.

When the SSID is configured with WPA-Enterprise authentication, the username used by the wireless client will be displayed in the 802.1X Authentication column of the Clients page.

2. Added support for some remaining new features on some EAP devices, which were added on controller v5.8 and earlier.

• EAP610 v3, EAP613 v1

  • Added support for PPSK function in Controller mode.

  • Added support for Band Steering.

  • Added support for 802.11r fast roaming protocol.

  • Added support for Multiple RADIUS server.

• EAP655-Wall v1

  • Added support for PPSK function in Controller mode.
  • Added support for 802.11r fast roaming protocol.
  • Added support for Multiple RADIUS server.
  • Added support for Multicast/Broadcast Management.
• EAP650 v1, EAP670 v1
  • Added support for Multiple RADIUS server.
  • Added support for Multicast/Broadcast Management.
• EAP615-Wall v1
  • Added support for Band Steering.
  • Added support for 802.11r fast roaming protocol.
• EAP650-Outdoor v1
  • Added support for RE mode in Standalone. Please refer to FAQ3646 to learn how to configure it.
• EAP650-Wall v1, EAP610 v2
  • Added support for PPSK function in Controller mode.
•  

Bug Fixed

 

Fixed some issues that may occur on some EAP devices.

• EAP655-Wall v1
  • Fixed abnormal IPv6 address acquisition for clients when enables Dynamic VLAN.
• EAP650 v1, EAP670 v1
  • Fixed abnormal IPv6 address acquisition for clients when enables Dynamic VLAN.
  • Fixed the disconnected issue caused by weather radar channels.
• EAP610 v3, EAP613 v1
  • Fixed the issue that the Bonjour service may cause the AP to restart under certain circumstances.
  • Fixed the issue that the Mesh AP may fail to return to the Connected state after a reboot in some cases.
  • Fixed the issue that the SNMP may fail to get the correct number of clients with OID 1.3.6.1.4.1.11863.10.1.1.1.0.

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada EAP devices. How to Upgrade/Downgrade Omada EAPs.

 

Firmware Download Link

 

EAP223 V2, EAP225 V3&V3.2, EAP225 V4, EAP225-Outdoor V1&V3 Pre-release

EAP230-Wall V1, EAP235-Wall V1 3.2.0_Build 20240103 Pre-release

EAP223 V1_1.3.0_Build 20240131 Pre-release

 

EAP610(EU)_V1_1.1.2 Build 20230922

EAP610(EU)_V2_1.1.4 Build 20230922

EAP610(EU)_V3_1.4.3 Build 20231215

EAP613(EU)_V1_1.4.3 Build 20231215

 

EAP615-Wall(EU)_V1_1.2.3 Build 20231215

EAP650-Wall(EU)_V1_1.1.4 Build 20231208

EAP655-Wall(EU)_V1_1.2.4 Build 20231208

 

EAP653(EU)_V1_1.0.9 Build 20230814

EAP650(EU)_V1_1.0.13 Build 20240131

EAP670(EU)_V1_1.0.12 Build 20230922

 

EAP620 HD(EU)_V2_1.1.2 Build 20230922

EAP620 HD(EU)_V3_1.2.3 Build 20230922
 

EAP610-Outdoor(EU)_V1_1.2.3 Build 20230922

EAP650-Outdoor(EU)_V1_1.1.3 Build 20240131

 

EAP680(EU)_v1_1.1.0_Build20240423(pre-release)

EAP683LR(EU_US_CA_JP)_v1_EAP683LR(US)_v1.6_1.1.0_Build20240412(pre-release)

EAP683UR(EU_US_CA_JP)_v1_EAP683UR(US)_v1.6_1.1.0_Build20240412(pre-release)

 

Additional Information

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the EAP upgrade, it's suggested to contact us with the following info:

• Omada Controller version 
• Device Firmware version with Build number (previous and current)

 

If your EAP gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

How to use the Recovery Mode to recover the firmware for EAP

 

Update Log

 

July 5, 2024:

Official version EAP245 V4(US) 1.3.1 has been released. 

 

Currently we only have US version, for other regions, please keep waiting for the update.

 

June 19, 2024:

Update to provide the Pre-Released version for the following EAPs:

EAP680 V1, EAP683 LR V1, EAP683 UR V1 Pre-release (Released on June 19th, 2024)

 

May 6, 2024:

Update to provide the Pre-Released version for the following EAPs:

EAP650-Wall V2_1.0.2, EAP650 V2_1.1.0 Pre-release (Released on May 6th, 2024)

 

Mar 13, 2024:

Update to provide the Pre-Released version for the following EAPs:

EAP223 V2, EAP225 V3&V3.2, EAP225 V4, EAP225-Outdoor V1&V3 (Pre-release version)

EAP230-Wall V1, EAP235-Wall V1 3.0.2_Build 20240103 (Pre-release version)(Pre-release version)

EAP223 V1_1.3.0_Build 20240131 (Pre-release version)(Pre-release version)

 

Feb 4th, 2024:

Update EAP650/EAP650-Outdoor beta version to official release.

EAP650v1: https://www.tp-link.com/support/download/eap650/v1/#Firmware

EAP650-Outdoorv1: https://www.tp-link.com/support/download/eap650-outdoor/v1/#Firmware

 

Jan 4th, 2024:

Update EAP610/EAP613/EAP615-Wall/ EAP655-Wall/ EAP650-Wall beta version to official release.

EAP610v3: https://www.tp-link.com/support/download/eap610/#Firmware

EAP613v1: https://www.tp-link.com/support/download/eap613/#Firmware

EAP615-Wallv1: https://www.tp-link.com/support/download/eap615-wall/#Firmware

EAP655-Wallv1: https://www.tp-link.com/support/download/eap655-wall/#Firmware

EAP650-Wallv1: https://www.tp-link.com/support/download/eap650-wall/#Firmware

 

Dec 18th, 2023:

Update EAP610/EAP620 HD/EAP610-Outdoor beta version to official release.

EAP610v1: https://www.tp-link.com/support/download/eap610/v1/#Firmware

EAP610v2: https://www.tp-link.com/support/download/eap610/v2/#Firmware

EAP620 HDv2: https://www.tp-link.com/support/download/eap620-hd/v2/#Firmware

EAP620 HDv3: https://www.tp-link.com/support/download/eap620-hd/v3/#Firmware

EAP610-Outdoorv1: https://www.tp-link.com/support/download/eap610-outdoor/v1/#Firmware

 

Nov 24th, 2023:

Update the EAP650-Wall v1 and EAP655-Wall v1 firmware, which fixed some issues.

• Before

EAP650-WALL_V1_1.1.1_Build 20230814 (Beta)

EAP655-WALL_V1_1.2.0_Build 20230717 (Beta)

• After

EAP650-WALL_V1_1.1.3_Build20231120 (Beta)

EAP655-WALL_V1_1.2.3_Build20231120 (Beta)

 

Nov 15th, 2023:

Update the EAP610 v3, EAP613 v1 and EAP615-Wall v1 firmware, which fixed some issues.

• Before

EAP610_V3_1.4.1_Build 20230828 (Beta)

EAP613_V1_1.4.1_Build 20230828 (Beta)

EAP615-WALL_V1_1.2.0_Build 20230711 (Beta)

• After

EAP610_V3_1.4.2_Build 20231011 (Beta)

EAP613_V1_1.4.2_Build 20231011 (Beta)
EAP615-WALL_V1_1.2.2_Build 20231018 (Beta)

 

Nov 8th, 2023:

Update EAP670 v1 beta version to official release.

EAP670v1: https://www.tp-link.com/support/download/eap670/v1/#Firmware

 

Sep 27th, 2023:

Update the EAP610 v3 and EAP613 v1 firmware, which fixed some issues.

• Before

EAP610_V3_1.4.0_Build 20230718 (Beta)

EAP613_V1_1.4.0_Build 20230718 (Beta)

• After

EAP610_V3_1.4.1_Build 20230828 (Beta)

EAP613_V1_1.4.1_Build 20230828 (Beta)

 

Aug 31st, 2023:

1) Add the following EAP firmware for early access.

EAP610(EU&US&CA)_V1_1.1.1_Build 20230814 (Beta)

EAP650-WALL(EU)_V1_1.1.1_Build 20230814 (Beta)
EAP653(EU&US&CA&JP)_V1_1.0.9 Build 20230814
EAP620HD(CA)_V2_1.1.1_Build 20230815 (Beta)

EAP620HD(EU&US&JP)_V2_1.1.1_Build 20230814 (Beta)

2) Update the following EAP firmware for early access.

EAP610(EU&US&CA&JP&EG)_V2_1.1.3_Build 20230814 (Beta)

EAP650(EU&US&CA&JP)_V1_1.0.10_Build 20230814 (Beta)

EAP620HD(EU&US&CA&JP&EG)_V3_1.2.2_Build 20230814 (Beta)

 

Aug 15th, 2023:

Add the following EAP firmware for early access.

EAP610_V2_1.1.2_Build 20230717 (Beta)

EAP620HD_V3_1.2.1_Build 20230717 (Beta)

EAP610-Outdoor_V1_1.2.1_Build 20230717 (Beta)

EAP650-Outdoor_V1_1.1.0_Build 20230811 (Beta)

 

Aug 7th, 2023:

Add the following EAP firmware for early access.

EAP615-Wall_V1_1.2.0_Build 20230711 (Beta)

 

Aug 2nd, 2023:

Post the following EAP firmware for early access.

EAP610_V3_1.4.0_Build 20230718 (Beta)

EAP613_V1_1.4.0_Build 20230718 (Beta)

EAP655-WALL_V1_1.2.0_Build 20230717 (Beta)

EAP650_V1_1.0.9_Build 20230702 (Beta)

EAP670_V1_1.0.11_Build 20230702 (Beta)

 

Recommended Threads

 

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates