Manual Speed Test er605v1 OC200 / RPI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Manual Speed Test er605v1 OC200 / RPI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Manual Speed Test er605v1 OC200 / RPI
Manual Speed Test er605v1 OC200 / RPI
2023-08-08 15:54:09
Tags: #Speedtest
Model: ER605 (TL-R605)   OC200  
Hardware Version:
Firmware Version:

Does anyone have the Manual Speedtest working on any hardware platform? What about ER605 with the latest firmware? I have two sites one of which is remote. The local site is utilizing an er605 with an OC200 controller and starlink as its internet provider. The remote site utilizes an ER605 with a raspberry pi controller and AT&T cellular for internet. Neither complete a speedtest; failing after 5% and 3% respectively. Both have their WAN / LAN DNS setting set to google DNS servers. Both have non default lan subnets eg, 192.168.50.1/24. All hardware is up to date with current firmware with the exception of the raspberry pi which is on a slightly older docker image. Regardless my local site is completely up to date on all firmware and controller versions.

 

I've searched throuigh the forums and found nothing as far as a solution (some mention of DNS which did not resolve the issue for me). I'm curious if anyone has this working on an ER605 / OC200 or Docker controller combination?

 

Thanks,

 

Kirk

  0      
  0      
#1
Options
3 Reply
Re:Manual Speed Test er605v1 OC200 / RPI
2023-08-08 20:26:47

  @kirkdb 

 

No success here either, both tested systems failed out at 3%.  No logs, either alert or event:

 

ER605v1 v1.3.0 with Docker based 5.9.31 Controller (no success via cloud or direct vpn in to controller).  WAN has public IP.

ER605v1 v1.3.0 with RPi based 5.9.31 Controller (no success via cloud)

 

My guess is TPlink hardcoded a site, or used a site selection API that no longer works (or is no longer licensed).

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:Manual Speed Test er605v1 OC200 / RPI
2023-08-13 23:43:28

@Hank21 are you referring to the automatic or the manual? The manual speedtest still exists on the latest public release. The automatic has been gone for a while.

  0  
  0  
#4
Options
Re:Manual Speed Test er605v1 OC200 / RPI
2023-08-14 03:21:21 - last edited 2023-08-14 03:23:58

 Hello @kirkdb

 

The speedtest feature has been deleted on Controller 5.11, please check whether the firmware of your OC200 is V5.9.

Thanks for your valuable feedback.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options