Wireguard client connects to the tunnel but does not ping local network IP
I can't ping any local network IP from the client connection
Wireguard Server
Wireguard Server PEER
Client Configuration
Client connect Status OK!
Server Wireguard PEER Status Connetions OK!
Using the OpenVPN connection, I can ping the local network IPs from OpenVPNClient, but I want to do it with Wireguard, which is much faster than the OpenVPN connection.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Bug_do_Ti
Thanks for posting in our business forum.
Setup on the Windows OS peer is incorrect. AllowIPs is incorrect.
If you can take a sec to read this, would be helpful:
Configuration Guide How to Configure WireGuard VPN on Omada Controller
- Copy Link
- Report Inappropriate Content
@Clive_A Thanks for the comment, but I've already done all the tutorials, but I can't ping any computer or device on the Wireguard server's local network
- Copy Link
- Report Inappropriate Content
Hi @Bug_do_Ti
Thanks for posting in our business forum.
Bug_do_Ti wrote
@Clive_A Thanks for the comment, but I've already done all the tutorials, but I can't ping any computer or device on the Wireguard server's local network
Then there is nothing I can do as I can verify the WireGuard is working on several test models I have. On ER605 V2 2.1.4 BETA and 2.1.2 public release.
If you cannot access it then it is your device issue. You should at least ping the WG interface IP to verify. If that's ping-able, your computer issue. Windows firewall, Network Diagnostics ICMP IPv4, is blocked by your firewall.
I've pointed out the error I can find. You've followed the tutorial but it does not mean you've done it right. I hope I can get cooperation and useful information for troubleshooting.
Good luck.
- Copy Link
- Report Inappropriate Content
I redid the configuration according to my friend's tip
Peer Connect OK
Connection OK but I can't ping the local network IP 192.168.0.253 from the Wireguard client. But on the local network, pinging that IP works. Using L2TP VPN I can ping IP 192.168.0.253 from the local network, but not via Wireguard VPN.
- Copy Link
- Report Inappropriate Content
did you set up the peer 10.0.0.1/24 as the peer allowed ip on er605?
are you able to ping the 192.168.0.1? if yes, then it's your computer. if no, then it could be the allowed IP, not returning the icmp echo.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3569
Replies: 5
Voters 0
No one has voted for it yet.