Business Community > Switches > TL-SG2210MP v4.0 constant POE errors for EAP650
< Switches

TL-SG2210MP v4.0 constant POE errors for EAP650

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG2210MP v4.0 constant POE errors for EAP650

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG2210MP v4.0 constant POE errors for EAP650
TL-SG2210MP v4.0 constant POE errors for EAP650
2023-10-17 23:17:34 - last edited 2023-10-24 07:22:16
Tags: #PoE
Model: SG2210MP  
Hardware Version: V4
Firmware Version: 4.0.5

 

I'm seeing a constant stream of POE power on/off errors on this TL-SG2210MP swtich.   I tried changing the switch port, but it didnt' help.    I can't even use any show commands because the errors messages prevent me from typing the show commands.   The switch is managed by an OC200 controller and both the TL-SG2210MP v4 and EAP650 V1 are fully managed.   Wifi users are reporting spotty connectivity via the EAP650.    I'm thinking of switching to the POE power injector to see if it fixes the situation.     

 

TL-SG2210MP>#2023-10-17 16:02:19,[PoE]/3/Power supply status of port 4 changes from off to on.

#2023-10-17 16:02:19,[PoE]/3/Power supply status of port 4 changes from on to off.

#2023-10-17 16:02:22,[PoE]/3/Power supply status of port 4 changes from off to on.

#2023-10-17 16:02:25,[PoE]/3/Power supply status of port 4 changes from off to on.

#2023-10-17 16:02:26,[PoE]/3/Power supply status of port 4 changes from on to off.
 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TL-SG2210MP v4.0 constant POE errors for EAP650-Solution
2023-10-24 07:21:55 - last edited 2023-10-24 07:22:16

Hi @ClintonW 

Thanks for posting in our business forum.

Do you connect the PoE and the power cable to the EAP650 at the same time?

This is the cause of this problem you have. So, use either one to power supply your device.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#7
Options
6 Reply
Re:TL-SG2210MP v4.0 constant POE errors for EAP650
2023-10-18 02:25:11

  @ClintonW 

 

You mean the PoE on the switch is keep turning on and off automatically and causing your EAP to power on and off? 

"SY" is a 22-year old boy presenting to the tp-link community with brain empty. Take care of yourself, and be well. Loycechan030
  0  
  0  
#2
Options
Re:TL-SG2210MP v4.0 constant POE errors for EAP650
2023-10-18 02:48:52

  @Loycelover- The EAP650 stays connected, but the switch keeps powering on and off the port over and over again. The EAP650 is being impacted by this and may be the source of the fault.   

 

Loycelover- wrote

  @ClintonW 

 

You mean the PoE on the switch is keep turning on and off automatically and causing your EAP to power on and off? 

 

  0  
  0  
#3
Options
Re:TL-SG2210MP v4.0 constant POE errors for EAP650
2023-10-18 02:52:25

  @ClintonW 

 

This could be strange, does that inpact the Internet access of the ports?Or just the PoE keeps turning on and off?

"SY" is a 22-year old boy presenting to the tp-link community with brain empty. Take care of yourself, and be well. Loycechan030
  0  
  0  
#4
Options
Re:TL-SG2210MP v4.0 constant POE errors for EAP650
2023-10-18 20:45:37

  @Loycelover- The POE port alarms for the EAP650 port is impacting the WIFI connectivity through the access point.    I have asked the people on site to plug in the EAP650 power adapter to see if it resolves the issue.   

 

 

  0  
  0  
#5
Options
Re:TL-SG2210MP v4.0 constant POE errors for EAP650
2023-10-19 01:53:06 - last edited 2023-10-19 06:21:47

  @ClintonW 

 

How many EAPs are you connecting on the switch? Double check if there's an insufficient power budget on your switch. You should also change some cables and try again. Also, are all the EAPs facing this or just one EAP? You can also try some other PoE devices and see if the problem is with the switch or EAP. If nothing works just send emails to official support then, truly weird prob.

"SY" is a 22-year old boy presenting to the tp-link community with brain empty. Take care of yourself, and be well. Loycechan030
  0  
  0  
#6
Options
Re:TL-SG2210MP v4.0 constant POE errors for EAP650-Solution
2023-10-24 07:21:55 - last edited 2023-10-24 07:22:16

Hi @ClintonW 

Thanks for posting in our business forum.

Do you connect the PoE and the power cable to the EAP650 at the same time?

This is the cause of this problem you have. So, use either one to power supply your device.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 702

Replies: 6

Tags

PoE
Related Articles
Poe not working on TL-SG2428P v4.0
273 0
TL-SG2210MP SFP POE to OC200 possible?
644 0
 Errors after TL-SG2210MP 1.0.5 upgrade
388 0
SG2210MP not powering EAP223 w/ POE
173 0
is TL-SG2210P POE+ compliant?
449 0
 TL-SG2210MP not powering an EAP245v3 with POE
1311 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.