Multiple EAPs as standalone under 1 SSID
Multiple EAPs as standalone under 1 SSID
Hello
Hope someone can help in what I thought was an easy query, but on all forums and configurations I cannot find answer for multiple EAPs, in standalone, without hardwar controller, under 1 SSID...
I tried to set up 2 (hopefully adding a 3rd) EAP, as standalones, under 1 SSID. Each on a diff floor in one house.
Each EAP is connected directly (hardwired in the house) via RJ45 to a router, independently (each with it's own PoE). The router connected then to the I/Net provider, as normal.
I set up each EAP with the same SSID name, to allow for roaming between each floor without needing to change on my phone/device. The floors are quite far apart, so I expect little interference.
I am just not sure, given I set them both up with the same SSID, that my phone or other device(s) will pick up the best or strongest EAP and clearly I cannot check this (even having downloaded the Omada App). I do see them both in the App, with diff IP's (So DHCP is all fine).
If I add a 3rd EAP, (so yes, 3 floor house in case not obvious) and call it same SSID, am I doing this right?
Also they are currently set to Auto channel, and I see confusing advice on whether I need to select a diff channel for each. Theyt both operate on either 2.4 or 5 GHz
Apologies, if this is too basic a q's in this forum but really appreciate someone's clear advice
THanks!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Connection question answered in post#9 above
- Copy Link
- Report Inappropriate Content
Just a word of thanks for the support...we always are quick to put a comment when looking for solutions, so just wanted to take a moment to say thank when things go well too
I installed the OC200 controller and my last and 3rd EAP, all now under control of the OC200. I instigated fast roaming, enabled mesh function (auto failover , full sector DFS and other auto fns), but no rate limits. It seems to pick the channel per EAP needed and I can but hope it does this intelligently and based on best option.
Everything seems to be working great.
I have also enabled, but do admit I am not sure of the exact implications (used the basic info provided to decide): AI Roaming; Dual Band 11k Report; Force-Disassociation and set Band Steering to balanced.
I also carried out auto channel optimisation in WLAN (Automatic Channel Optimization for all 2.4 GHz, 5 GHz, 6 GHz) and Automatic Power Optimization.
I have not set profiles, nor need a portal. 802.1x is not set.
If anyone feels I miss something else or perhaps have not fully set this up correctly, much appreciate your inputs. Otherwise, big thank you again
- Copy Link
- Report Inappropriate Content
I think you can sit back and enjoy your success, you certainly had me with the 'things are working great' comment :). Well done.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2763
Replies: 14
Voters 0
No one has voted for it yet.