ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
58 Reply
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-14 12:03:03
@Clive_A Please note that I haven't encountered any problems using IPv6 so this is not an urgent query
  0  
  0  
#56
Options
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-18 06:22:51

Hi @mhoam 

Thanks for posting in our business forum.

mhoam wrote

  @Clive_A 

This Beta version is working well on both IP4 and IP6

However, the test site https://ipv6-test.com/ tells me that ICMPv6 packets are being filtered by the firewall on my ER605. I have created no additional ACL rules for IPv6 so this must be the default rule.

As you may know, ICMPv6 is described as an important part of of IPv6 and this RFC suggests ICMPv6 packets should be allowed through 

https://datatracker.ietf.org/doc/html/rfc4890

 

I have tried to create a specific IPv6 ACL rule to allow IPv6 ICMP to work as required but can't see how.

 

Please advise on TP-Link's advice as to what ICMPv6 rules should be created and how this can be achieved in this Beta version

Alternatively, assuming your developers are well aware of the relevant RFCs, should the default IPv6 Defaults coded into the Firmware be amended?

 

Thanks

mhoam

 

 

 

According to the dev, you can use ACL to allow ICMPv6.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#57
Options
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-18 10:23:16

  @Clive_A 

Thanks for the response.

I have tried to create an ACL to allow ICMP6. However, as you can see from the attached screenshot when I select to "Allow" the "Service Type" of "ICMP_All" the radio button to choose IP4 is pre-selected and the IP6 button is grayed out and is NOT selectable!

 

Please let me know if there is another method required to allow ICMPv6

Thanks

mhoam

 

  0  
  0  
#58
Options
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-19 01:13:11 - last edited 2023-12-19 01:15:26

Hi @mhoam 

Thanks for posting in our business forum.

mhoam wrote

  @Clive_A 

Thanks for the response.

I have tried to create an ACL to allow ICMP6. However, as you can see from the attached screenshot when I select to "Allow" the "Service Type" of "ICMP_All" the radio button to choose IP4 is pre-selected and the IP6 button is grayed out and is NOT selectable!

 

Please let me know if there is another method required to allow ICMPv6

Thanks

mhoam

 

 

No. Try the controller mode instead.

Or you manually create ICMPv6 in the Service Type and try again.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#59
Options
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-19 10:32:04

  @Clive_A 

Thanks for the response.

Firstly, I am using my ER605 in stand-alone mode, ie via the web UI and do not wish to use the controller for one TP-Link device.

 

Secondly, there is no option to identify ICMPv6 in the definition of Service Types, just ICMP. 

 

regards

mhoam

 

  0  
  0  
#60
Options
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-19 10:51:10

  @Clive_A 

 

Thanks for your assistance, I have now created a new service type using protocol "Other" with a Protocol Number 58 to identify ICMPv6.

This new Service type is used in an ACL rule to allow ICMPv6 packets through the Firewall apparently successfully, with more testing to be done 

 

Regards

mhoam

  2  
  2  
#61
Options
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-23 10:34:19 - last edited 2023-12-23 10:35:29

New firmwares ver. 1.3.1 and 2.2.3 released.

  3  
  3  
#62
Options
Re:ER605 V2_2.1.5 Build 20231024 Beta Firmware for Omada Controller V5.11 (Released on Oct 26th, 2023)
2023-12-23 16:50:16

  @phongtom 

 

Strangely, I was only able to upgrade the ER605V2 manually. In Omada it indicated the upgrade, but it generated an error for application. And in another part directly for the upgrade, the button was grayed out as if it were not enabled. That's bizarre.
But, I already have the new firmware.

  0  
  0  
#63
Options