ER605 v2 - No USB modem connected.
Hi,
I had an older version of firmware 2.0.0 Build 20220106 Rel.56391 and it recognized an LTE router (Huawei E3372-325)
Now after the upgrade, I get the error No USB modem connected. event USB LED is on.
Also with older versions LTE network was not working. I set manually data but no effect.
If I put LTE USB Router to my laptop it works fine.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @NevenS
Thanks for posting in our business forum.
NevenS wrote
Hi,
I'm using Huawei e3372-325 - 4G USB Dongle
This is a new setup and it was never working with ER605.
Do you have this personal option?
I see it in Argentina but this is I guess mobile provider from Argentina personal. com. ar
Got a confirmation from the test team that this LTE modem is never compatible with our product. I am afraid you should buy according to the compatibility list.
- Copy Link
- Report Inappropriate Content
Hi @NevenS
Thanks for posting in our business forum.
Use the beta firmware instead of the V2.2.2 and try again.
- Copy Link
- Report Inappropriate Content
Hi,
When I rebooted after the firmware upgrade it was Connected for some minutes and now back to:
No USB modem is connected.
This is a screen and my settings. And my USB modem is blinking RED and GREEN. When the USB modem is working direct to PC then its green and working fine.
- Copy Link
- Report Inappropriate Content
Hi @NevenS
Thanks for posting in our business forum.
NevenS wrote
Hi,
When I rebooted after the firmware upgrade it was Connected for some minutes and now back to:
No USB modem is connected.
This is a screen and my settings. And my USB modem is blinking RED and GREEN. When the USB modem is working direct to PC then its green and working fine.
Did you use manual config before? Or you just changed this and it leads to a problem on the connection?
Blink green and red usually indicates it got a problem with the connection.
I think you should consider your config then.
Question: do you use auto config with the USB modem when it is plugged in your PC?
- Copy Link
- Report Inappropriate Content
Hi,
I can’t use auto connection as my country "Bosnia and Herzegovina" is not on the list?
Question: do you use auto config with the USB modem when it is plugged in your PC?
I just plugged in USB and my config was already auto-downloaded and. configured.
USB has IP http://192.168.8.1/
- Copy Link
- Report Inappropriate Content
Hi @NevenS
Thanks for posting in our business forum.
This is not a modem. It's more like a mobile WIFI router.
Did this work on your ER605 before? I am suspicious. How did you set it up before? I am sure that this is a config issue. Because you need to dial the Internet. This Huawei mobile is in router mode. This does not match the USB modem configuration.
Do you have this personal option?
- Copy Link
- Report Inappropriate Content
Hi,
I'm using Huawei e3372-325 - 4G USB Dongle
This is a new setup and it was never working with ER605.
Do you have this personal option?
I see it in Argentina but this is I guess mobile provider from Argentina personal. com. ar
- Copy Link
- Report Inappropriate Content
Hi @NevenS
Thanks for posting in our business forum.
Don't have any other solution to this. 4G/3G USB Modem Compatibility List for ER605
If you have upgraded to V2.1.5 Beta and it still cannot work, you can try to downgrade to 2.1.1 and see if it can work or not.
NevenS wrote
Hi,
I had an older version of firmware 2.0.0 Build 20220106 Rel.56391 and it recognized an LTE router (Huawei E3372-325)
I am only saying this because you said it was working. If it does not work ever before, then it might be a compatibility problem with the modem.
- Copy Link
- Report Inappropriate Content
Hi @NevenS
Thanks for posting in our business forum.
NevenS wrote
Hi,
I'm using Huawei e3372-325 - 4G USB Dongle
This is a new setup and it was never working with ER605.
Do you have this personal option?
I see it in Argentina but this is I guess mobile provider from Argentina personal. com. ar
Got a confirmation from the test team that this LTE modem is never compatible with our product. I am afraid you should buy according to the compatibility list.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 964
Replies: 8
Voters 0
No one has voted for it yet.