ER605 update firmware from 2.1.2 to 2.2.2 no effect
ER605 update firmware from 2.1.2 to 2.2.2 no effect
Tags:
#Firmware Update
Hi,
I'm trying to update firmware from 2.1.2 to 2.2.2. I have downloaded firmware to install it from usb. I have opened 443 port.
The firmware seems to be installed. There's no error message. After this, the hardware reboot. So all seems to be optimal. But when I read the firmware version, I realize that iht asn't changed.
ER605 connected to a router (internet box) but it use dmz to send traffic to ER605.
there is absolutely not any error message.
Is there an issue ? What i have forgotten ?
I have no idea
1 Accepted Solution
Re:ER605 update firmware from 2.1.2 to 2.2.2 no effect-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting Manual ★ ☚
(Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Re:ER605 update firmware from 2.1.2 to 2.2.2 no effect-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting Manual ★ ☚
(Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)