Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2

Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2

Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2
Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2
2023-12-15 00:27:07 - last edited 2023-12-15 12:02:58
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.2

Hi!

ER605 V2 here, firmware 2.2.2.
Trying to config SITE-TO-SITE (permanent tunnel), but no luck.
How can I add multiple subnets in Peer "Allowed IP" parameter? (On each side).
I can not ping between subnets, but routers can between them.

 

--------------------------------------------------------

 

# Subnet A

10.10.2.0/24


# Router A

[Wireguard]

Local IP Address = 10.10.10.2

Listen Port = 51820

[Peers]

Public Key = PubKey Router B

Endpoint = Router B IP

Endpoint Port = 51820

Allowed IP = 10.10.3.0/24      <<<<<<<<  THIS IS WHERE I CAN NOT ADD ANOTHER SUBNET

Persistent Keepalive = 16

 

--------------------------------------------------------

 

# Subnet B

10.10.3.0/24


# Router B

[Wireguard]

Local IP Address = 10.10.10.3

Listen Port = 51820

[Peers]

Public Key = PubKey Router A

Endpoint = [empty]

Endpoint Port = [empty]

Allowed IP = 10.10.2.0/24      <<<<<<<<  THIS IS WHERE I CAN NOT ADD ANOTHER SUBNET

Persistent Keepalive = 16

 

--------------------------------------------------------

 

From any device from Subnet A I can ping only to Router B IP.

(ping 10.10.3.1  >> OK)
(ping 10.10.3.101 >> Request timed out!)

 

From any device from Subnet B I can ping only to Router A IP.

(ping 10.10.2.1  >> OK)
(ping 10.10.2.101 >> Request timed out!)

 

 

Any help will be appreciated!
Thanks!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2-Solution
2023-12-15 12:02:42 - last edited 2023-12-15 12:02:58

  @Clive_A
Finally, I was able to solve the problem.
ICMPv4 was disable by default in workstations. Sorry about that, my mistake. :(
VPN works flawlessly.
Now everything is fine!
Thanks for your time!

 

Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2
2023-12-15 03:28:08

Hi @dmvazquez 

Thanks for posting in our business forum.

I've answered your reply in another post. So, I don't repeat it here again. You can continue the conversation with me in this new thread.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#2
Options
Re:Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2
2023-12-15 03:46:38

  @Clive_A
Thanks for your response!
I will try your suggestion and I will let you know.

Based on posted configuration, do you see any error?
Thanks in advance!
 

  0  
  0  
#3
Options
Re:Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2
2023-12-15 03:52:57

Hi @dmvazquez 

Thanks for posting in our business forum.

dmvazquez wrote

  @Clive_A
Thanks for your response!
I will try your suggestion and I will let you know.

Based on posted configuration, do you see any error?
Thanks in advance!
 

I gave a brief look earlier. Don't see anything wrong with it. You do seem the guy who followed the guide. yes

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#4
Options
Re:Wireguard Site-To-Site not working / ER605, V2, Firmware 2.2.2-Solution
2023-12-15 12:02:42 - last edited 2023-12-15 12:02:58

  @Clive_A
Finally, I was able to solve the problem.
ICMPv4 was disable by default in workstations. Sorry about that, my mistake. :(
VPN works flawlessly.
Now everything is fine!
Thanks for your time!

 

Recommended Solution
  0  
  0  
#5
Options