Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Archer Mr600 v2 can't working properly
< 5G/4G Wi-Fi Routers/MiFi

Archer Mr600 v2 can't working properly

12

Archer Mr600 v2 can't working properly

Archer Mr600 v2 can't working properly
Archer Mr600 v2 can't working properly
2024-04-02 00:13:53
Tags: #Sunshine
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.7.0 0.9.1 v0001.0 Build 220826 Rel.58057n

Hello @Sunshine  im from phillipines please me about  my archer mr600 v2 cant working properly.  Befor  this modem router mr600v2 is too fast 90 mbps to upload  20 mbps in band 1 in 3 to a 4gonly and now  after upgrade to 1.7.0 firmware it is  too slow connection sometimes no internet connection  i try all bands 1, 3, 28, 41 available  in my location but still not working properly  i sett ry 4gpreferred and also 4g only but still the same . I go also in lte discovery  using samsung A02 mobile  according your opinion here to know a better  carriers aggregation but still don't work properly.  What will ido please help.

  0      
 
  0      
 
#1
Options
15 Reply
Re:Archer Mr600 v2 can't working properly
2024-04-02 05:56:28

  @Jene 

 

1. Please check band information on Advanced > Status page, which is the real band the router works

2. You mentioned that you have two MR600 V2, one is 1.6.0 firmware, the other one is 1.7.0 firmware, please move them together, use the same SIM card at same location, then check the band information on status page to see if they are the same

3.  Please use https://www.speedtest.net or the speedtest APP/CLI(https://www.speedtest.net/apps) for testing speed accurately. Let us know the specific test results of the two routers

4. For your  samsung A02 mobile, please share with us the screenshots of the bands working on the phone with the same SIM card.

 

For LTE disconnecting issue, please refer to this thread: LTE keeps disconnecting

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer Mr600 v2 can't working properly
2024-04-02 06:23:51

  @Sunshine this is 1.7.0 firmwire using band 1 .

 

  0  
  0  
#3
Options
Re:Archer Mr600 v2 can't working properly
2024-04-02 06:43:36

  @Sunshine this a 1.6.0 firmware  using band 1 

 

Befor this modem is working properly  using 1.5.0 firmware  . . Here in my location band 1 is strength signal

  0  
  0  
#4
Options
Re:Archer Mr600 v2 can't working properly
2024-04-02 06:57:12

  @Sunshine befor this modems are working properly using 1.5.0 firmware using band 1 . It is working 90 mbps  download and 20 upload  untill modems are need to firmware upgrade according to a archer mr600 v2  firmware upgrade setting .. so i upgrade  it then  one of modem i firmware  upgrade using 1.6.0 last week  and the other one is to 1.7.0 firmware 4days ago  it is almost  the same signal strength too slow internet connection. Please help  to back a high signal strength og my modem router 

  0  
  0  
#5
Options
Re:Archer Mr600 v2 can't working properly
2024-04-02 07:16:27

  @Sunshine  this my two modems newly firmware upgrade 

  0  
  0  
#6
Options
Re:Archer Mr600 v2 can't working properly
2024-04-02 07:17:38

  @Sunshine 

  0  
  0  
#7
Options
Re:Archer Mr600 v2 can't working properly
2024-04-03 03:12:02 - last edited 2024-04-03 03:12:12

  @Jene 

 

Hi, please check network type on Advanced > Status page to see if it works on 4G LTE or WCDMA which is 3G, you could also try selecting Network Mode 4G only on Advanced > Network > Internet page.

 

If there is still any problem, please share with us screenshots of Advanced > Status page and Advanced > Network > Internet page.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options
Re:Archer Mr600 v2 can't working properly
2024-04-03 07:12:35

  @Sunshine this  sir 

  0  
  0  
#9
Options
Re:Archer Mr600 v2 can't working properly
2024-04-03 07:13:44

  @Sunshine 

  0  
  0  
#10
Options
Re:Archer Mr600 v2 can't working properly
2024-04-03 07:25:16

  @Jene 

 

Hi, this screenshot doesn't include the real band the router is using, please click Advanced on the top, then you will see a Status page where you could find more 3G/4G related information.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 668

Replies: 15

Tags

Sunshine
Related Articles
MR600 WINS not working properly
84 0
SMS not working on MR600 V2 with Jio SIM
4575 2
Archer MR600 V2 - QOS not working correctly
253 0
Archer MR600 V2 stop working/hangs
303 0
Archer MR600 Not Working on Australia Optus
227 0
ssh hostname no working archer mr600
1630 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.