EAP225-outdoor trying to identify ports

EAP225-outdoor trying to identify ports

EAP225-outdoor trying to identify ports
EAP225-outdoor trying to identify ports
2024-06-10 03:26:20
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.1.6 Build 20240313 Rel. 43415

snmpwalk give me the following if Descriptions:

IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: sit0
IF-MIB::ifDescr.4 = STRING: br0
IF-MIB::ifDescr.5 = STRING: wifi0
IF-MIB::ifDescr.6 = STRING: wifi1
IF-MIB::ifDescr.11 = STRING: bkhap1
IF-MIB::ifDescr.12 = STRING: sta1
IF-MIB::ifDescr.14 = STRING: ath1
IF-MIB::ifDescr.17 = STRING: ath0
IF-MIB::ifDescr.18 = STRING: ath10
 

lo = loopback eth0 = the physical rj-45 port, I assume wifi0 = 2.4GHz and wifi1 = 5.0GHz (I may have these backwards)

can someone tell me what the other ports are and is one of them the mesh traffic?

Thank you. 

  0      
  0      
#1
Options
1 Reply
Re:EAP225-outdoor trying to identify ports
3 weeks ago

Hi  @MikeW1 

 

Although I don't have the full list, I can confirm there is no Mesh traffic data can be found through SNMP. 

 

We recommend to use Omada Controller to monitor the Omada EAPs. Anyway if you want to use Mesh feature, you must have a controller running. 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options