Business Community > Gateways > DHCP server set ip range over CLI
< Gateways

DHCP server set ip range over CLI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCP server set ip range over CLI

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP server set ip range over CLI
DHCP server set ip range over CLI
2024-08-03 02:55:40 - last edited 2024-08-05 01:09:04
Tags: #VLAN & Multi-Networks #DHCP Service
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.5

Hello,

 

I have a unique network configuration where I would like to write my own software to configure the IP range of several DHCP pools with separate VLANs. I was planning on doing it over SSH however I can't find a way to set the IP range of a specific DHCP pool.

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:DHCP server set ip range over CLI-Solution
2024-08-05 01:09:00 - last edited 2024-08-05 01:09:04

Hi @Juniormunk 

Thanks for posting in our business forum.

Here's the guide:

https://static.tp-link.com/upload/manual/2023/202307/20230725/1910013378_ER605(UN)2.0_CLI.pdf

 

You might wanna start reading from this:

Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:DHCP server set ip range over CLI-Solution
2024-08-05 01:09:00 - last edited 2024-08-05 01:09:04

Hi @Juniormunk 

Thanks for posting in our business forum.

Here's the guide:

https://static.tp-link.com/upload/manual/2023/202307/20230725/1910013378_ER605(UN)2.0_CLI.pdf

 

You might wanna start reading from this:

Recommended Solution
  1  
  1  
#2
Options
Re:DHCP server set ip range over CLI
2024-08-05 15:24:51

  @Clive_A This doesn't help me any. I am looking for a way to change the available range for example I have a DHCP server for vlan 3 that has an ip-mask of 10.35.39.4 255.255.255.0 and I would like the dhcp hand out IP addresses from 10.35.39.20 to 10.35.39.200

  0  
  0  
#3
Options
Re:DHCP server set ip range over CLI
2024-08-06 01:02:32

Hi @Juniormunk 

Thanks for posting in our business forum.

Juniormunk wrote

  @Clive_A This doesn't help me any. I am looking for a way to change the available range for example I have a DHCP server for vlan 3 that has an ip-mask of 10.35.39.4 255.255.255.0 and I would like the dhcp hand out IP addresses from 10.35.39.20 to 10.35.39.200

If you need to do that, you can only do it from the web GUI.

  1  
  1  
#4
Options

Information

Helpful: 1

Views: 636

Replies: 3

Tags

VLAN & Multi-Networks DHCP Service
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.