ONVIF different network disconnects
ONVIF different network disconnects
I have the following NVR
VIGI NVR1016H(UN) 1.0
Firmware Version 1.1.0 Build 240507 Rel.77310n
There are 2 Hikvision cameras NVR connects to over VPN (different network to where the NVR is), and it regularly happens that one of those cameras, or both of them will come up as disconnected even though they are connected as I can ping them or check them with the app.
The only way to reconnect them is to remove and re add them. Is this common behavor or is there a way to refresh NVR so that i tries to reconnect instead of having to remove it altogether and then add it again?
Thanks,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I was able to find the reason of the problem:
1) Add the (HikVision) camera using port 443
2) Reboot NVR
3) Camera appears as disconnected
Then try this
1) Add the (HikVision) camera using port 80
2) Reboot NVR
3) Camera appears as connected now
I'm sure this is related to the SSL cert presented by the IPC to the NVR. If you need to do remote session to reproduce I'm happy to help, however you should be able to reproduce it with steps above.
Using port 80 for NVR to connect to IPC solves all issues, and in my case it is ok since I am already running this through a VPN tunnel.
Thanks,
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @scott1981
Thanks for posting in our business forum.
scott1981 wrote
I have sent an email to your registered email address ni*****.pa******@gmail.com
Please check it out. Ticker number: TKID240846793
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 525
Replies: 13
Voters 0
No one has voted for it yet.