Omada 605 PPTP client dont reconnect automatically
Omada 605 PPTP client dont reconnect automatically
Hi
I have pptp client problem with my omada 605,
pptp client ID 1 always reconnects after disconnect but client ID 2 not.
i need every day disable-enable pptp connection via omadas gui for reconnect.
even my old asus router can automatically reconnect as pptp client but tplink not??
is there any setting for auto-reconnect vpn client?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Clive_A Hi
I use this pptp client to pick some tplink nc ip cameras rtsp streams to my dvr).
This is random issue.
Just filtered syslogs from er605:
366 disconnects
auto-reconnected only 169 times
other 197 times i need to enter er605 interface and re-enable pptp client
right now pptp disconnect and no reconnect
Oct 13 06:08:22 ER605: 2024-10-13 06:08:22 pptp<5>: WAN2: PPTP client was disconnected.
- Copy Link
- Report Inappropriate Content
I give TP-link support RDP access to my er605 .
they were connecting every week, looking for something for three months
no result.
it keeps disconnecting
I am moving to Openvpn
- Copy Link
- Report Inappropriate Content
Hi @YuriyB
Thanks for posting in our business forum.
YuriyB wrote
I give TP-link support RDP access to my er605 .
they were connecting every week, looking for something for three months
no result.
it keeps disconnecting
I am moving to Openvpn
Last week, the dev collected the debug log and we have some initial thoughts on this problem.
We are not 100% sure if this is the cause of the problem you experienced but we plan to offer a beta fix based on the reasons we speculated.
We might provide this beta this week as we need to code and compile.
- Copy Link
- Report Inappropriate Content
Thank You for answer.
I disabled pptp client ID 2 some time ago and changed it to openvpn..,
so I have only one ID 1 Enabled pptp tunnel,
and today er605 disconnected this tunnel without any reason. remote pptp server has no error messages. its uptime is more than two months.
log (read from bottom to top)
this is the first time this ID1 pptp tunnel disconnected, because usually ID2 disconnected almost every day.
I thoungt reconnect problem problem present with Two active pptp tunnels... but NO
entered web interface - disable\enable tunnel and it work again.
- Copy Link
- Report Inappropriate Content
Hi @YuriyB
Thanks for posting in our business forum.
YuriyB wrote
Thank You for answer.
I disabled pptp client ID 2 some time ago and changed it to openvpn..,
so I have only one ID 1 Enabled pptp tunnel,
and today er605 disconnected this tunnel without any reason. remote pptp server has no error messages. its uptime is more than two months.
log (read from bottom to top)
this is the first time this ID1 pptp tunnel disconnected, because usually ID2 disconnected almost every day.
I thoungt reconnect problem problem present with Two active pptp tunnels... but NO
entered web interface - disable\enable tunnel and it work again.
We have the initiation diagnosis regarding this. Disable/enable is the way to reconnect them properly now but not gonna work if you reboot the router. Will get back to you after they compile a beta for your test.
- Copy Link
- Report Inappropriate Content
Seems that it has been fixed in beta ER605_un_2.2.6_20241111-rel57697_common_v2_debug_up_2024-11-12_10.03.10 I made tens of pptp server restarts and my er605 auto reconnects every time :) ... testing and observation, will give feedback later
- Copy Link
- Report Inappropriate Content
Hi @YuriyB
Thanks for posting in our business forum.
YuriyB wrote
Seems that it has been fixed in beta ER605_un_2.2.6_20241111-rel57697_common_v2_debug_up_2024-11-12_10.03.10 I made tens of pptp server restarts and my er605 auto reconnects every time :) ... testing and observation, will give feedback later
That'd be a wonderful news. Will keep an eye on this thread.
- Copy Link
- Report Inappropriate Content
@Clive_A Hi,
ER605_un_2.2.6_20241111-rel57697_common_v2_debug_up_2024-11-12_10.03.10
problem is fixed.
Testing this firmware for 8 days: tens of restarts, simulatenous and one by one restarts of both pptp servers, er 605 client always reconnected.
biggest surprise was today, when remote pptp server powered off
Nov 20 13:04:56 ER605: 2024-11-20 13:04:56 ppp<5>: [OMADA]WAN2: MPPE disabled: terminating link!
....
4+Hours of reonnect retries until remote pptp serve turned on and tens of messages pptp<5>: WAN2: PPTP client began connecting.
....
Nov 20 17:01:11 ER605: 2024-11-20 17:01:11 ppp<5>: [OMADA]10.2.0.1155: PPTP Client yuriyvpn connected to the server successfully.
thanks tp-link. please add this fix to next stable update.
- Copy Link
- Report Inappropriate Content
To anyone who reads this:
The solution firmware is listed here:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 913
Replies: 19
Voters 0
No one has voted for it yet.