Business Community > Gateways > Wifi clients are connecting but not getting IP addresses
< Gateways

Wifi clients are connecting but not getting IP addresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wifi clients are connecting but not getting IP addresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wifi clients are connecting but not getting IP addresses
Wifi clients are connecting but not getting IP addresses
2024-09-16 15:23:29 - last edited 2024-09-18 02:29:06
Tags: #VLAN & Multi-Networks #DHCP Service #Network Connectivity
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.2.1

I had to physically move my network into a new cabinet this weekend and had thought nothing of it as the network configuration wasn't changing and working perfectly. My Default Wireless network has no issues. But now, for some reason all of the other VLAN's have clients that connect but don't get an IP address. I have an have 5 total VLANs and none of clients assigned can connect wirelessly except the clients on the default network. A new device can't even connect to any of the VLAN's except default. This was all working before the physical move. Yes I've rebooted all of the devices, yes all of the devices are on the current firmware version. Yes the DHCP pools are up. I have no idea how to resolve this issue.

 

OC200 -> ER8411 -> TL-SG2428P -> EAP660 HD.

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Wifi clients are connecting but not getting IP addresses -Solution
2024-09-17 16:54:36 - last edited 2024-09-18 02:29:06

For anyone else having this problem

 

Devices -> (your) Switch - Ports - what ever port is on is a verified profile.

 

All of my ports were set to ALL except the one, the upload port that was set to LAN that wasn't a profile that was available.

 

BTW the TP-Link Omada tech support chat is very very good.

Recommended Solution
  1  
  1  
#11
Options
10 Reply
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 16:23:35

  @Phreaknes 

 

check whether you have enabled vlan on the interfaces connected to the switch

 

  0  
  0  
#2
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 16:41:49
Where is that setting at? Thinking back I might have moved the OC200 and the AP to different ports.
  0  
  0  
#3
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 16:46:25

  @Phreaknes 

 

it is in the same place where you configured vlan, wired networks and lan

 

  0  
  0  
#4
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 17:02:45
I'm on the site that is having issues. Settings - Wireless networks - WLAN is where I setup the VLANs but I don't see your screen shot. I didn't change any of these settings but changing the port for the AP and the OC200 might have been.
  0  
  0  
#5
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 17:06:16

  @Phreaknes 

 

it is not a wireless network, you configure vlan here.

 

  0  
  0  
#6
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 17:19:00

  @MR.S 

 

Ahh gotcha. You are correct. it's been a while since I stood up a VLAN. I haven't changed these settings though. The interfances that are selected are the active LAN interfaces on the router.

 

  0  
  0  
#7
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 17:41:15

  @Phreaknes 

 

double check that the switch is connected to port 11 or 8

 

  0  
  0  
#8
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 17:57:45 - last edited 2024-09-16 17:58:49

the upload from the router to the Swich is on port 11 one of the Server NIC's is on port 8.

  0  
  0  
#9
Options
Re:Wifi clients are connecting but not getting IP addresses
2024-09-16 18:05:20

  @Phreaknes 

 

then you have to check the switch ports that go to the access point and router. there you must use switch port profile all

If that doesn't work then I have no more suggestions.

 

 

  0  
  0  
#10
Options
Re:Wifi clients are connecting but not getting IP addresses -Solution
2024-09-17 16:54:36 - last edited 2024-09-18 02:29:06

For anyone else having this problem

 

Devices -> (your) Switch - Ports - what ever port is on is a verified profile.

 

All of my ports were set to ALL except the one, the upload port that was set to LAN that wasn't a profile that was available.

 

BTW the TP-Link Omada tech support chat is very very good.

Recommended Solution
  1  
  1  
#11
Options

Information

Helpful: 0

Views: 1143

Replies: 10

Tags

VLAN & Multi-Networks DHCP Service Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.