Omada Captive Portal not showing if ACL are enabled
Hi,
I have a short stack setup on my home network composed of OC200, ER605, SG2008P, and EAP650. After double-checking the configuration, I found some issues in the Captive portal. When my Kids' SSID is added to ACL Rules and the rules are Deny access Source; Kids SSID and Destination; Default Lan, the kids' captive portal won't show or load, but when I disabled the ACL rules, the captive portal loads normally. I made the ACL rules so my kid's LAN can't ping or access the Default or Main LAN.
I created a duplicate configuration of Lan and Vlans (ex. Lan1 & Lan2) the only difference between the two is that Lan1 has ACL Rules and Lan2 doesn't have ACL Rules. The Lan1 doesn't show or load his captive portal but the Lan2 shows his captive portal.
Each Lan has its own Lan and SSID and Vlans and Captive portal the only difference in their configuration is the ACL Rules.
regards,
Hi @GRL
is there a way that Kids cant access my OC200 controller IP?
now i created to allow Kids SSID to access my Controller IP (OC200) so the Captive portal will show but, they can access the controller login page.
if im going to deny Kids SSID to access my OC200 controller IP they cant access the controller login page but, again the Captive portal wont load.
my OC200 Ip is static and why im saying this is that they can possible access my OC200 controller IP is because it shows when the Captive portal load
regards