Early Access ER707-M2 V1 1.2.4 Build 20241030 Pre-Release Firmware (Released on Nov 26th, 2024)
This Article Applies to
ER707-M2(UN) V1
Release Notes
Bug Fixed:
1. Fixed the “Refer Check Failed” error when accessing the Standalone management page via port forwarding.
2. Fixed policy routing exception with L2TP VPN.
3. Fixed the issue that the flood_defense feature would cause high CPU utilization.
4. Fixed the issue that device will reboot when configuring the same allowed subnet in different Wireguard VPN entries.
5. Fixed the issue that the sys log will affect the adoption of device.
Modification:
1. Enhanced memory security
2. Optimized traceroute tool
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways
Firmware Download Link
ER707-M2(UN)_V1_1.2.4_Build20241031
Notes:
(1) The above firmware applies to the described models.
(2) Your device’s configuration won’t be lost after upgrading.
(3) If you have disabled the HTTPS port, please enable the HTTPS port before upgrading the firmware.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the router upgrade, it's suggested to contact us with the following info:
- Omada Controller version
- Device Firmware version with Build number (previous and current)
If your router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
How to use the Emergency Mode to recover the firmware for Omada Gateways
Update Log
Nov 26th, 2024:
Release of this post.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
I just saw that my Public IP address is showed as 192.168.1.1 instead of actual one:
Also my NAS, which was trying to get Public IP address from router has failed 3 times during the night. after few hours it got proper IP...
My NAS is getting standard LAN IP address from DHCP on router (there's a IP-MAC binding) and it works properly.
But the NAS is also getting Public (External) IP address in order to update it's DDNS.
Since 1.2.4 update I have observed that there were some issues with that and it was the first time I saw this error:
We can skip that for now. I'll try to watch this closely and let you know if that will happen again/more often in the future.
Hi @RaRu
Thanks for posting in our business forum.
RaRu wrote
My NAS is getting standard LAN IP address from DHCP on router (there's a IP-MAC binding) and it works properly.
But the NAS is also getting Public (External) IP address in order to update it's DDNS.
Since 1.2.4 update I have observed that there were some issues with that and it was the first time I saw this error:
We can skip that for now. I'll try to watch this closely and let you know if that will happen again/more often in the future.
The way to tell if there is an actual issue is to revert it. Hmm, I do not use Synology so I cannot comment or be sure what that might be.
If there is a doc for me to read and learn how it gets the IP and works, I might determine if there is a real issue.
@Clive_A Should this be showing up in the Cloud Firmware Pool for updating via the new Controller firmware functionality? I don't see anything new showing up for my ER707-M2 v1.0 - it still says its current "1.2.3 Build 20240822 Rel.52946" is latest:
And One-Time Upgrade shows it as "Up-to-date":
