Network Configuration

Network Configuration

Network Configuration
Network Configuration
Wednesday - last edited Thursday
Model: EAP225-Outdoor  
Hardware Version:
Firmware Version:

Hi. We wish to setup a community WiFi. We will be using Starlink as the internet source. We then want to use a router with a TL-Ant2412D to provide wireless coverage to the site. Can we use EAP 225 Outdoors (42 required) to receive the transmission.and via the POE injector connect an ethernet cable to a laptop for internet access.Should we use Omada to set the system up. If not please suggest a configuration to achieve this. 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Network Configuration-Solution
Thursday - last edited Thursday

Hi  @PBSOL 

 

Yes, EAP225-outdoor with the latest firmware version supports repeater mode, it allows you to receive a wifi signal and broadcast a wifi network

 

And yes, we can plug a PC into the ETH port of the POE injector to get Internet access.

 

Omada controller is not a must. 

 

How to configure Omada EAP in Repeater mode

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Network Configuration-Solution
Thursday - last edited Thursday

Hi  @PBSOL 

 

Yes, EAP225-outdoor with the latest firmware version supports repeater mode, it allows you to receive a wifi signal and broadcast a wifi network

 

And yes, we can plug a PC into the ETH port of the POE injector to get Internet access.

 

Omada controller is not a must. 

 

How to configure Omada EAP in Repeater mode

Recommended Solution
  0  
  0  
#2
Options