Business Community > Switches > SG3210, ES205GP - VLANs
< Switches

SG3210, ES205GP - VLANs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

SG3210, ES205GP - VLANs

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SG3210, ES205GP - VLANs
SG3210, ES205GP - VLANs
2025-01-15 13:11:02 - last edited 2025-01-16 02:10:43
Tags: #VLAN & Multi-Networks #Network Connectivity #DHCP Service

I've recently tired to add a ES205GP in between my two SG3210. This is to make the run between the two switches less than 100m. 

This was working fine with a SG1005P but when I added and adopted the ES205GP I was unable to receive any IP adressses for clients downstream of the ES205GP. 

 

When the switch was inline on the network I was able to see all the access points, controller, router and switches.

It looks like there were no IP addresses being issued to clients though.

All the devices are on fixed IP addresses from 192.168.10.2 to 192.168.10.12. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:SG3210, ES205GP - VLANs-Solution
2025-01-15 22:53:08 - last edited 2025-01-16 02:10:43

 I managed to get it working by creating the ALL profile and also updated the controller software. 

Recommended Solution
  1  
  1  
#4
Options
6 Reply
Re:SG3210, ES205GP - VLANs
2025-01-15 17:52:31

  @Longhill 

 

The ES205GP switches do not show the client IP, I don't know if it's a bug or if it's supposed to be like that,

 

 

  1  
  1  
#2
Options
Re:SG3210, ES205GP - VLANs
2025-01-15 17:57:50

  @Longhill 

 

another thing is that if you have not updated your controller then you will not get profile all on ES205GP, you will only get default lan on the switch ports, you have to create a port profile yourself. but I recommend you upgrade to controller version 5.15.8.2 where this is fixed

 

  0  
  0  
#3
Options
Re:SG3210, ES205GP - VLANs-Solution
2025-01-15 22:53:08 - last edited 2025-01-16 02:10:43

 I managed to get it working by creating the ALL profile and also updated the controller software. 

Recommended Solution
  1  
  1  
#4
Options
Re:SG3210, ES205GP - VLANs
2025-01-16 02:13:01

Hi @MR.S 

Thanks for posting in our business forum.

Could be this reason:

Troubleshooting Topology in Controller Is Not Recognized Properly

 

It is not fully LLDP-supported.

  1  
  1  
#5
Options
Re:SG3210, ES205GP - VLANs
2025-03-18 23:04:25

  @MR.S 

 

I have all of my ports showing "All" but it will not provide an IP downstream to my APs. What am I missing? Do I just need to buy an 8port? 

  0  
  0  
#6
Options
Re:SG3210, ES205GP - VLANs
2025-03-19 03:59:43

  @Whoopah 

have you got the latest firmware for the switch? When I updated mine I was able to use the default "All" profile. 

You could also try creating your own profile and adding all the VLANs. I did this prior to the firmware update and named it "ALL". 
 

 

  1  
  1  
#7
Options

Information

Helpful: 0

Views: 1094

Replies: 6

Tags

VLAN & Multi-Networks Network Connectivity DHCP Service
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.