Business Community > Gateways > Problem with adapting ER605 v2.20 with the controller after changing the IP
< Gateways

Problem with adapting ER605 v2.20 with the controller after changing the IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Problem with adapting ER605 v2.20 with the controller after changing the IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem with adapting ER605 v2.20 with the controller after changing the IP
Problem with adapting ER605 v2.20 with the controller after changing the IP
2025-02-27 23:42:30 - last edited 2025-02-28 01:57:15
Tags: #Controller
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6
Hello.
I have a connected ER605 v2.20 router with the Omad controller in the latest beta version (I also checked other versions) placed on Docker with standard settings, everything works without a problem, but after changing the default IP from 192.168.
I have several networks set up on Docker and only this one has a problem after changing the IP. Is it a software error?

Please help

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP-Solution
2025-02-28 01:57:05 - last edited 2025-02-28 01:57:15

Hi @djwujek 

Thanks for posting in our business forum.

When you change the IP, you need to refresh the IP of the controller.

If you don't replug the cable, it will keep using the old DHCP IP.

Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP-Solution
2025-02-28 01:57:05 - last edited 2025-02-28 01:57:15

Hi @djwujek 

Thanks for posting in our business forum.

When you change the IP, you need to refresh the IP of the controller.

If you don't replug the cable, it will keep using the old DHCP IP.

Recommended Solution
  1  
  1  
#2
Options
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP
2025-02-28 02:01:04
This was done, I even restarted the controller with no results, it still does not connect to the controller.
  0  
  0  
#3
Options
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP
2025-02-28 02:19:10

  @djwujek 

 

The router changes its IP address. After restarting, the controller joins the correct (changed subnet) and has the appropriate ports open, but the router no longer connects to the controller.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 397

Replies: 3

Tags

Controller
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.