Business Community > Gateways > Transfering configuration from Dead router
< Gateways

Transfering configuration from Dead router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Transfering configuration from Dead router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Transfering configuration from Dead router
Transfering configuration from Dead router
2025-04-03 07:15:58 - last edited 2025-04-03 07:55:20
Tags: #Controller #WAN Setup
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version:

Good Day

 

Sorry for my bad english I am not that great with english

 

So i found my Er605 router no power, so i need to restore the configuration to the new one same model  Er605 unfortunately I don't have the backup of the configuration of the defective Er605, But I do use the Omada controller app is any other way I can restore the configure to the new router? 

 

Thank you for answering my answer

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Transfering configuration from Dead router-Solution
2025-04-03 07:21:45 - last edited 2025-04-03 07:55:20

Hi @Daniele0129 

Thanks for posting in our business forum.

Omada app not the Omada Controller app.

Or you mean you have Omada Controller?

If you have Omada Controller, you can remove the old and adopt the new. Then it'll sync the config on this controller right now to the new one.

Recommended Solution
  0  
  0  
#2
Options
Re:Transfering configuration from Dead router-Solution
2025-04-03 07:32:19 - last edited 2025-04-03 08:03:18

Hi @Daniele0129 

Thanks for posting in our business forum.

Daniele0129 wrote

  @Clive_A 

 

So all of the configuration will move to the new device?

Only when you are using Controller mode to manage the previous one. Then, yes.

Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Transfering configuration from Dead router-Solution
2025-04-03 07:21:45 - last edited 2025-04-03 07:55:20

Hi @Daniele0129 

Thanks for posting in our business forum.

Omada app not the Omada Controller app.

Or you mean you have Omada Controller?

If you have Omada Controller, you can remove the old and adopt the new. Then it'll sync the config on this controller right now to the new one.

Recommended Solution
  0  
  0  
#2
Options
Re:Transfering configuration from Dead router
2025-04-03 07:28:36

  @Clive_A 

 

So all of the configuration will move to the new device?

  0  
  0  
#3
Options
Re:Transfering configuration from Dead router-Solution
2025-04-03 07:32:19 - last edited 2025-04-03 08:03:18

Hi @Daniele0129 

Thanks for posting in our business forum.

Daniele0129 wrote

  @Clive_A 

 

So all of the configuration will move to the new device?

Only when you are using Controller mode to manage the previous one. Then, yes.

Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 215

Replies: 3

Tags

Controller WAN Setup
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.