DecoX50-4g setting problems
I bought a Deco x50-4g to add my deco network for 4g internet back up.After setting x50-4g as main router for decos on the phone app iot network settings,mesh setting and restart schedule settings are lost.
except these problems i am living speed problem on the deco x50 which is connected with lan cable to deco x50-4g
What will be the problem about it and do you have any plan for new firmware about x50-4g?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Update:
Thank you very much for your time and patience.
It has been confirmed by the engineer that:
For Internet Backup>Hybrid Mesh Backup, the satellite Deco 5G unit also needs to support the "Internet Backup" feature, and currently, Deco X50-5G_V1/V1.2 with firmware 1.2.x is the only Deco 5G router that has added the "Internet Backup" function.
In other words, currently, "Deco X50_V1_1.6.x+ Deco X50-5G_V1_1.2.1" is the only combination for "Hybrid Mesh Backup".
Thanks a lot and best regards.
- Copy Link
- Report Inappropriate Content
Hi, welcome to the community.
Did you set Deco X50-4G in wireless router mode and enable the 3G/4G Backup, such as How to set up 3G/4G or 4G/5G Backup on Deco router
The current firmware of Deco X50-4G doesn't support IoT network as well as Reboot Schedule. These features need the support of the main Deco. So when Deco X50-4G is set as the main Deco unit, these feature entrances will disappear from the Deco APP.
By the way, can I have the current firmware version of your satellite Deco X50?
If the satellite Deco X50 is V1, the Internet Backup-HybridMesh Backup might be a workaround:
Deco Internet Backup Feature Guide
Thank you very much.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for the update.
Then I think you can switch Deco X50-1.6.7 as the main Deco, leave Deco X50-4G as the satellite and check whether you can find "Hybrid Mesh Backup" option.
Wait for your reply.
Best regards.
PS: please also make sure your Deco APP is up-to-date.
- Copy Link
- Report Inappropriate Content
i switched deco x50 as main deco and there is no option for hybrid mesh back up and also there is no option for 3G/4G back up. There is only back up option is hotspot
- Copy Link
- Report Inappropriate Content
Update:
Thank you very much for your time and patience.
It has been confirmed by the engineer that:
For Internet Backup>Hybrid Mesh Backup, the satellite Deco 5G unit also needs to support the "Internet Backup" feature, and currently, Deco X50-5G_V1/V1.2 with firmware 1.2.x is the only Deco 5G router that has added the "Internet Backup" function.
In other words, currently, "Deco X50_V1_1.6.x+ Deco X50-5G_V1_1.2.1" is the only combination for "Hybrid Mesh Backup".
Thanks a lot and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 346
Replies: 5
Voters 1