Business Community > Gateways > ACCESS MANAGEMENT IP OF ER605 from a different subnet
< Gateways

ACCESS MANAGEMENT IP OF ER605 from a different subnet

ACCESS MANAGEMENT IP OF ER605 from a different subnet

ACCESS MANAGEMENT IP OF ER605 from a different subnet
ACCESS MANAGEMENT IP OF ER605 from a different subnet
2025-06-14 15:43:03 - last edited 2025-06-16 01:30:54
Tags: #VLAN & Multi-Networks #Routing
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.2

Hi I'm using ER605 as a switch and my setup looks like this:

 

 

 

I have disabled the DHCP of ER605 because IP will come from pfsense. I also setup the ports as UNTAG

 

 

 

Now, I have connected a laptop on my WiFi (192.168.30.x), I can access all the devices on VLAN50 (192.168.50.x) except for the management IP of ER605 which is 192.168.50.15. But I can access the ER605 management IP if I'm connected in the same VLAN (VLAN50).

 

I setup remote management in the admin settings like the below, but it doesn't work. I can't access the ER605 IP from a different subnet.

 

 

Anyone can help me? Thank you.

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ACCESS MANAGEMENT IP OF ER605 from a different subnet-Solution
2025-06-16 01:29:34 - last edited 2025-06-16 01:30:54

  @ronaldallanp 

ronaldallanp wrote

  @MR.S It's not working. I can access devices which are directly connected to the ER605 except the management IP of ER605.

The config is to use static routing. It does not work because your pfSense doesn't advertise the route, so the devices on pfSense do not know where to route.

 

Assuming you have the wrong config on the static routing.

 

This use case is not our recommended way, and we do not have a solution or support for this.

I know this type of setup, yet it requires the routing to work. If it does not work, it is not a problem that resides on our side. 

Recommended Solution
  1  
  1  
#6
Options
5 Reply
Re:ACCESS MANAGEMENT IP OF ER605 from a different subnet
2025-06-14 22:16:55 - last edited 2025-06-14 22:32:13

  @ronaldallanp 

 

remote managment settings is only for wan interface.

 

it's not a switch so try adding a route to the other networks with (pfsence) as the default gateway

 

  0  
  0  
#2
Options
Re:ACCESS MANAGEMENT IP OF ER605 from a different subnet
2025-06-14 22:18:47

  @MR.S ok. Noted on that. But do you have any idea how can I access it from different subnet?

MR.S wrote

  @ronaldallanp 

 

remote managment settings is only for wan interface.

 

  0  
  0  
#3
Options
Re:ACCESS MANAGEMENT IP OF ER605 from a different subnet
2025-06-14 22:32:27 - last edited 2025-06-14 22:38:45

  @ronaldallanp 

 

 

it's not a switch so try adding a route to the other networks with (pfsence) as the default gateway

 

 

 

 

 

  1  
  1  
#4
Options
Re:ACCESS MANAGEMENT IP OF ER605 from a different subnet
2025-06-15 12:32:31

  @MR.S It's not working. I can access devices which are directly connected to the ER605 except the management IP of ER605.

  0  
  0  
#5
Options
Re:ACCESS MANAGEMENT IP OF ER605 from a different subnet-Solution
2025-06-16 01:29:34 - last edited 2025-06-16 01:30:54

  @ronaldallanp 

ronaldallanp wrote

  @MR.S It's not working. I can access devices which are directly connected to the ER605 except the management IP of ER605.

The config is to use static routing. It does not work because your pfSense doesn't advertise the route, so the devices on pfSense do not know where to route.

 

Assuming you have the wrong config on the static routing.

 

This use case is not our recommended way, and we do not have a solution or support for this.

I know this type of setup, yet it requires the routing to work. If it does not work, it is not a problem that resides on our side. 

Recommended Solution
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 436

Replies: 5

Tags

VLAN & Multi-Networks Routing
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.