Business Community > Routers > Does the ER8411 support hot standby / failover
< Routers

Does the ER8411 support hot standby / failover

Does the ER8411 support hot standby / failover

Does the ER8411 support hot standby / failover
Does the ER8411 support hot standby / failover
3 weeks ago - last edited 2 weeks ago
Model: ER8411  
Hardware Version:
Firmware Version:

Hi Friends!

 

I checked the product specifications page, and did a search before posting.   Does the ER8411 support hot standby / failover ?

 

I can't confirm either way so far.

 

Thanks for readin!

 

-=b=-

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Does the ER8411 support hot standby / failover-Solution
2 weeks ago - last edited 2 weeks ago

  @sobephish 

If you mean the power supply, hot switch, yes this model supports it. 

It does not require the configuration. Simply get two power bricks installed and be ready on this model.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:Does the ER8411 support hot standby / failover
3 weeks ago

  @sobephish 

 

It supports link backup (load balancing).

 

It is mentioned in the Advanced Features under the specifications page.

 

 

Here's a screenshot of what it looks like in the Omada Controller : 

 

Omada Controller : v5.15.24.17 Gateways : ER8411 V1.0, ER7206 v1.0 and ER605 V2.0 Switches : SG3428X v1.30 & TL-SG2008P v1.0 APs : EAP773 v1.0, EAP620HD v1.0 and EAP610 v3.0
  0  
  0  
#2
Options
Re:Does the ER8411 support hot standby / failover
3 weeks ago

sobephish wrote

Hi Friends!

 

I checked the product specifications page, and did a search before posting.   Does the ER8411 support hot standby / failover ?

 

I can't confirm either way so far.

 

Thanks for readin!

 

-=b=-

  @sobephish 

 

No ER8411 does not have hot standby, but you can have one as a cold spear, it's quick to adopt if the router breaks, the downside is that it requires you to be onsite.

  0  
  0  
#3
Options
Re:Does the ER8411 support hot standby / failover-Solution
2 weeks ago - last edited 2 weeks ago

  @sobephish 

If you mean the power supply, hot switch, yes this model supports it. 

It does not require the configuration. Simply get two power bricks installed and be ready on this model.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 204

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.