Home Network Community > Wi-Fi Routers > Archer B59500 having issues with Blink Connect
< Wi-Fi Routers

Archer B59500 having issues with Blink Connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer B59500 having issues with Blink Connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer B59500 having issues with Blink Connect
Archer B59500 having issues with Blink Connect
2025-07-06 03:26:33 - last edited 2025-07-07 03:33:18
Tags: #Network Connectivity
Model: Archer BE9500  
Hardware Version: V1
Firmware Version: 1.0.4 Build 20250414 rel.37964

I have a Archer BE9500 (model drop down doesn't allow this router to populate) that won't let Blink Cameras finish scyncing.  Can go through every step of the way and still doesn't work. Had a Archer a2300 and it worked fine, EERO6 and worked fine. Upgraded to this and I have everything else working (Kasa, GoSund, Ring, Alexa, etc..) but I can't get these Blink to finish connection. Tried IoT, guest wifi 2.4, firmware updates on the blink sync modules and still no luck. 

 

Any help would be appreciated

  0      
 
  0      
 
#1
Options
5 Reply
Re:Archer B59500 having issues with Blink Connect
2025-07-06 03:28:53
Firmware is up to date on the router. 1.0.4 Build 20250414 rel.37964
  0  
  0  
#2
Options
Re:Archer B59500 having issues with Blink Connect
2025-07-07 09:07:23

Hi@DerekAS ,

Thank you for contacting our community.

 

If only one device failed to access the internet of the router, it is more likely that the device needs to be modified to adapt to the new network.

You can also try to hard reset the camera and configure it with the new network.

 

It is recommended that you can contact support of the camera for further help.

 

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#3
Options
Re:Archer B59500 having issues with Blink Connect
2025-07-07 17:13:44

  @Joseph-TP Thanks for the feedback. I have also reached out to Blink and working with them. I wasnt sure if there was a setting on the router to help with the issue, but hopefully on their end, something can be done. 

 

 

  1  
  1  
#4
Options
Re:Archer B59500 having issues with Blink Connect
2025-07-09 06:22:04

Hi@DerekAS,

If any updates or settings need to be modified on the router, feel free to reply here.

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More △New Firmware for Archer BE260/Archer BE400 to Support VPN Merge, New ECO Mode, and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#5
Options
Re:Archer B59500 having issues with Blink Connect
2025-07-13 16:09:49

The newest sync modules and blink Mini's work just fine, but my blink sync module 2's still wont work.

 

I also noticed that while connected to my router, I can access live view on my cameras via blink. If I turn off the wifi, then I can access the camera's just fine. Same thing happens for the blink cameras in my office, which don't have any tp-link routers. If I am connected to my router at home, I can't connect, but if I turn off the wifi, I connect just fine.

 

Something with the router outbound is having an issue? Maybe need a port range configuration?

 

Tried this with other apps on my phone and also had the issue with my CA lo_tery app. Can scan bar codes and connect to the CA lo_tery server to view results while on the wifi. Turn off the wifi and it works just fine. 

 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 458

Replies: 5

Tags

Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.