Business Community > Controllers > OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working
< Controllers

OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working

OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working

OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working
OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working
3 weeks ago - last edited Tuesday
Tags: #VPN #Controller
Model: OC300  
Hardware Version: V1
Firmware Version: 1.30.7 Build 20250704 Rel.78617

Hi all,

I have OC300 controller and I have also an OpenVPN Server configured on that Controller, so that my other site can access same network.

I have chosen OpenVPN Client-to-Site type because I have both public IPs, but both sites are behind NAT.

 

Now, the thing is that, after the upgrade to latest version of Controller, the OpenVPN Server stops and the Built-In Radius Server cannot reach the remote site and thus the IP assignments stop as well and the devices don't get the network without an IP...

I'm quite sure it was working before, because I have this configuration since one year as least.

All Omada devices have the latest firmware.

 

Also, if I ping one device in the VPN, even if the VPN is enstablished from the Insights panel, the ping fails.

 

So, I think we have 3 problems in chain! :)

 

Let me know! And let me know if you need more info!

 

Thank you,

Fra

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working-Solution
a week ago - last edited Tuesday

Hi Vincent,

since the VPN server was down, I took the time to force provision the router where the VPN server is and now it started back working.

I will monitor the situation!

 

Thanks for your hints!

Fra

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working
3 weeks ago - last edited 3 weeks ago

Hi  @nicolati 

 

Thanks for posting here.

 

To better understand the situation, please let us know the following info:

1. Do you use the OC300 to manage two routers in two sites?

2. What's the model number and firmware of the router you are using?

3. What's the firmware version of the OC300 before this update?

 

Please try Click Force provision the routers (Config > Manage Device ) to see if it helps.

 

 

 

If not, please share with us the topology of the network, and VPN config page, the VPN tunnels page and the ping result. Thanks.

 

 

 

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#2
Options
Re:OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working
3 weeks ago

  @Vincent-TP 

Hi Vincent,

Yes, I manage both sites and both routers ER605 V2 from the same OC300 V1 controller, which is in the main site (the sites are 2 houses, but I don't think this is relevant :)).

Both ER605 V2 have the same latest firmware, which is 2.3.0 official release. With 2.2.6 the problem was the same, because it seems it started when I have upgraded the OC300 V1 from 1.29.7 to 1.30.7, both officials.

So, it seems to me the 1.30.7 has some problems in this sense. The OpenVPN server is not stable. Did you modify anything in this regard in 1.30.7 ?

 

I would like to avoid to force provisioning, since the other site is 600Km far away and, if something goes wrong, I cannot reset it right now.

 

The VPN per se is working. The real problem is that it seems it stops working from time to time...

 

About the ping, I discovered I can ping the landing IPs. When the remote site enstablish the tunnel (split one), it lands on 192.168.80.0/24 and I can ping certain IP of this family, in fact. However, I don't know who they are since the real IP on the remote site network is under the 192.168.2.0/24, so I know those IPs only and I imagined to find them on the main site once the VPN tunnel enstablish. Maybe I'm wrong here! :)

 

Thank you,

Fra

  0  
  0  
#3
Options
Re:OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working-Solution
a week ago - last edited Tuesday

Hi Vincent,

since the VPN server was down, I took the time to force provision the router where the VPN server is and now it started back working.

I will monitor the situation!

 

Thanks for your hints!

Fra

Recommended Solution
  0  
  0  
#4
Options
Re:OC300 1.30.7 Build 20250704 Rel.78617 - OpenVPN Server sometimes stops working
Tuesday

Hi  @nicolati 

 

Glad to hear that.

Anything new comes up, don't hesitate to let us know.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 170

Replies: 4

Tags

VPN Controller
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.