Business Community > Gateways > Print Across Vlans
< Gateways

Print Across Vlans

Print Across Vlans

Print Across Vlans
Print Across Vlans
Wednesday - last edited 22 hours ago
Tags: #VLAN & Multi-Networks #mDNS
Model: ER605 (TL-R605)   SG2008P  
Hardware Version: V2
Firmware Version:

Hi Guys,

I have a problem with vLans, again.

 

I buy a print. Instal in a default Vlan with 192.168.1.50 IP

I have my phone in Vlan 2 (Fmain) with 192.168.2.XX - When try print some documment dont find print.
When connect to wireless in Vlan 1(Fadm) eith 192.168.1.XX print appears and can print (same problem with my windows PC)

 

I set up mDNS and ACL rules (gateway and switch), to open all trafic between vlans but cant work. See rules above. I opened all traffic and not specific ports or IPs to make sure I wasn't making any configuration mistakes.
I search all over internet and cant find solution.

 

Any idea ?

 

Thanks

 

 

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Print Across Vlans-Solution
Yesterday - last edited 22 hours ago

  @LinkX92 

Thank you for your post. Please confirm whether your firmware is the latest version; if not, upgrade to the newest firmware. Additionally, try pinging the printer’s IP address from your phone or PC to verify that the printer is reachable. You may also need to check the printer’s settings to see if any adjustments are required so it can be discovered across VLANs—some printers only broadcast within their local subnet.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Recommended Solution
  0  
  0  
#2
Options
7 Reply
Re:Print Across Vlans-Solution
Yesterday - last edited 22 hours ago

  @LinkX92 

Thank you for your post. Please confirm whether your firmware is the latest version; if not, upgrade to the newest firmware. Additionally, try pinging the printer’s IP address from your phone or PC to verify that the printer is reachable. You may also need to check the printer’s settings to see if any adjustments are required so it can be discovered across VLANs—some printers only broadcast within their local subnet.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Recommended Solution
  0  
  0  
#2
Options
Re:Print Across Vlans
Yesterday - last edited Yesterday

  @LinkX92 

 

By default, your gateway allows inter-VLAN routing and you don't need the ACL rules for the gateway or the switches.  You can always add them later as necessary.  The mDNS configuration looks OK.  I have never used AirPrint on my iPhone but I decided it was time to configure and test it.  My iPhone is on a different VLAN from the printer.  It works OK after configuring the mDNS rule for "Printers". 

 

You do need to ensure your printer supports Bonjour services and has Bonjour enabled.

 

 

 

1x ER706W 1x OC300 4x SG2008 1x EAP610 2x EAP650
  0  
  0  
#3
Options
Re:Print Across Vlans
Yesterday - last edited Yesterday

  @Ethan-TP 

 

 

All my devices are update:

 

 

All services are enable in my print

 

 


If ping from my phone, the ping is successful.
If use my wife iphone it discover printer on 192.168.2.XX

 

In my windows pc dont do automactic discover in lan but if i search by ip it found printer and works good. 
At the moment the only problem crossing the vlan is my android phone. 
I also have other smart home devices that have the same problem, they are not visible between vlans and I wanted to try to understand if solving this problem would lead me to solving this problem as well.

These prints are from my phone

 

In default vlan 1 - 192.168.1.XX - Print appears and can print

 

 

In vlan 2 - 192.168.2.XX - Print dont appears and cant print



  0  
  0  
#4
Options
Re:Print Across Vlans
Yesterday
With my wife iphone works all good, her iphone stays connected in vlan 2 and talk to print in vlan 1, print and works good. My phone (android) dont work. All services in printer all turn on, see topic above.
  0  
  0  
#5
Options
Re:Print Across Vlans
Yesterday

  @LinkX92 

 

According to information found on the internet, older Android devices do not support mDNS.  How old is your phone?  If you post your phone's make and model, perhaps other forum members can help you.  I don't use Android devices here.

 

1x ER706W 1x OC300 4x SG2008 1x EAP610 2x EAP650
  0  
  0  
#6
Options
Re:Print Across Vlans
Yesterday
Its a Samsung Galaxy A53 5G https://www.gsmarena.com/samsung_galaxy_a53_5g-11268.php Could my phone be the problem? It's the only device that doesn't work, but it's not that old. It has the latest Android version available, so it doesn't make much sense that it doesn't support mDNS.
  0  
  0  
#7
Options
Re:Print Across Vlans
22 hours ago

  @LinkX92 

You can try adjusting the settings on your phone to see if that resolves the issue, or contact your phone’s support team for assistance with this situation.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 231

Replies: 7

Tags

VLAN & Multi-Networks mDNS
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.