Hi,

currently I am running 1 omada switch (TL-SG2008P, 192.168.5.201) and 2 omada APs (EAP610, 192.168.5.202-203) in standalone mode and I want to add them to an omada software controller. 
I can adopt my 2 Omada APs but somehow I cannot see the switch. I set them all up in static mode. On the APs I activated management vlan 5 and also Layer 3 Accessability. I couldn't find these options on the switch unfortunately.
I have a static interface entry in the switch with 192.168.5.201 and vlan 5, i deleted the vlan1 entry. Also set up a static routing with hostname and destination to 0.0.0.0 and next hop to my opnsense gateway at 192.168.5.1

My controller is installed on unraid as docker on IP 192.168.5.200 on the interface br0. It is bound to Port 8 on my omada switch which is untagged vlan5, PVID vlan 5.
I really don't know what the problem is now. There should be no firewall problems because it's all in the same subnet?! My APs get found immediately but not the switch. Is there a vlan problem? I tried also to activate via online controller via s/n and it worked with the switch but with the local controller it's not working.

p.s. more info: vlan1 is untagged on port 1-8