Business Community > Gateways > ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
< Gateways

Early Access ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)

12

Early Access ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)

Early AccessER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
3 weeks ago - last edited a week ago
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.3.3 Build 20250930 (Pre-Release)

This Article Applies to

 

ER8411(UN) v1.0 and V1.60

 

Release Notes

 

Version Info:

 

This firmware is fully adapted to Omada Controller V5.15.20.X.
Minimum FW Version for Update:1.2.3 Build 20241121 Rel.21021 and above

 

Please note that you will NOT be able to downgrade to previous official firmware after upgrading to this firmware!

 

New Features:

 

No

 

Enhancements:

 

No

 

Bug Fixed:

 

  1. Fixed the issue that the DHCP address pool would not generate any log when all IP addresses were exhausted in specific scenarios.
  2. Fixed the issue that the L2TP server process occasionally crashed.
  3. Fixed the issue that the IPS process exited abnormally and generated a core-dump file, which led to memory exhaustion.
  4. Fixed the issue that static route entries with special characters in the name field could not take effect.
  5. Fixed the issue that the L2TP server occasionally leaked address pools when iOS devices connected.
  6. Fixed several security issues.

 

Additional information 

 

  1. Adapted to the new Omada VI.
  2. Adapted to RED certification requirements.
  3. Enhanced device security.

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways

 

Firmware Download Link

 

ER8411(UN) V1_1.3.3 Build 20250930

 

Notes:

(1) The above firmware applies to the described models.

(2) Your device’s configuration won’t be lost after upgrading.

(3) If you have disabled the HTTPS port, please enable the HTTPS port before upgrading the firmware.

(4) Please note that you will not be able to downgrade to the previous official firmware after upgrading to this firmware!

 

Additional Information

 

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the router upgrade, it's suggested to contact us with the following info:

  • Omada Controller version 
  • Device Firmware version with Build number (previous and current)

 

If your router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

How to use the Emergency Mode to recover the firmware for Omada Gateways

 

Update Log

 

October 11th, 2025:

Release of this post.

 

Recommended Threads

 

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]

 

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0      
 
  0      
 
#1
Options
11 Reply
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
3 weeks ago - last edited 3 weeks ago

  @Ethan-TP 

 

Hooray!  Temperature reported to controller is now back to what it was pre 1.3.0 (which is correct, all FW post 1.2.3 were 7-8c higher than what it should have been)

 

So far, so good.

 

 

Also, the ER605v2 2.3.1 beta release thread doesnt have download link and the first post content seems a mish-mash of copy/paste from prior versions - just a heads up

  0  
  0  
#2
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
3 weeks ago

  @GRL 

That was a draft still being edited; I’ve since deleted the post. It will be republished once it’s updated.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0  
  0  
#3
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
2 weeks ago - last edited 2 weeks ago

  @Ethan-TP 

 

I cannot upgrade from this beta to the official 1.3.3 from the support site which is a later build

 

 

From the 1.3.3 official changelog

 

Important Notice: It is recommended to upgrade to version 1.3.4 afterwards to use a more secure signature algorithm.

1.3.4 Is not posted, i Assume this is the same as the 2.2.2 > 2.2.3 Pre-RED to RED updated for the ER7206 v2 back in Augues

 

-ST

  0  
  0  
#4
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
2 weeks ago

GRL wrote

  @Ethan-TP 

 

I cannot upgrade from this beta to the official 1.3.3 from the support site which is a later build

 

 

From the 1.3.3 official changelog

 

Important Notice: It is recommended to upgrade to version 1.3.4 afterwards to use a more secure signature algorithm.

1.3.4 Is not posted, i Assume this is the same as the 2.2.2 > 2.2.3 Pre-RED to RED updated for the ER7206 v2 back in Augues

  @GRL 

 

 

 

same for me too, can't upgrade to official version.

 

 

  0  
  0  
#5
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
2 weeks ago - last edited a week ago

  @Ethan-TP 

 

I had to do a SSH roll-back and then a re-upgrade in the end.  On 1.3.3 beta the gateway would not accept any firmware file other then the beta posted here

  1  
  1  
#6
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
2 weeks ago - last edited 2 weeks ago

  @GRL 

 

I do a roll-back to  and then I upgrade to the offecial version 

 

so now we just have to wait for 1.3.4 smiley

  0  
  0  
#7
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
Yesterday

I've been trying to upgrade to the release candidate, but it keeps failing with the error below.

 

This model in the selected site has already specified a firmware version.

 

I've attempted to rollback and upgrade, but it is not working. Any help would be much appreciated.

  0  
  0  
#8
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
Yesterday - last edited Yesterday

  @Ethan-TP 

 

I had the same problem on a different router model. You need to back up the configuration and re-upload the firmware through safe mode, but this time using the official firmware. Turn off the power, press the reset button for 10 seconds, release it for another 10 seconds, and repeat this three times. Then disconnect all ports and connect a computer to one of the ports with the network card set to 192.168.0.20 255.255.255.0. Press the reset button. Turn on the power while holding the reset button. After a few seconds, the LED on the connected port will start flashing. Release the reset button. Go to 192.168.0.10 through your computer and upload the official version.

 
  0  
  0  
#9
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
10 hours ago

  @djwujek 

Yes, we are aware of the issue. The trial firmware released in October for the ER8411 and ER7412-M2 does have a firmware-lock problem. We have already reported this to the relevant team.If you encounter this issue, please consider rolling back the firmware via SSH or uploading it through recovery mode.

Wishing you a joyful life and smooth internet! Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates Omada US Enterprise Beta Program Launch
  0  
  0  
#10
Options
Re:ER8411 V1 1.3.3 Build 20250930 Pre-Release Firmware (Released on 11th October, 2025)
9 hours ago

  @Ethan-TP Thank you for sharing it.

 

I've performed the SSH rollback and attempted to upgrade, but I received the same error. I finally upgraded the firmware to 1.3.6 with the Emergency mode. I'm unsure if I'll be able to upgrade normally in the future or if I'll need to use Emergency mode moving forward.

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 1138

Replies: 11

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.