OpenVPN
Hi.
I'm having a problem with my ACL. After enabling the "DenyAll" rule, I can't communicate with devices from external device. The tunnel works fine without this rule. With this rule, it's visible on both the client and server sides, it receives an IP address, but there's no communication (including to the internet). Only default network, VPN uses the same addresses.
What rule should I add?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Never mind. I forgot to set up an IP group for ACL purposes. That's what happens when you do it at 2-3 a.m. after work. Now works fine.
| Index | description | direction | politics | protocols | source | target |
|---|---|---|---|---|---|---|
| 4 | AllowLAN | WAN IN | Allow | All | Allowed networks* | IPGroup_Any |
| 5 | DenyAll | WAN IN | Deny | All | IPGroup_Any | IPGroup_Any |
*local subnets
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@GRL I'm trying to add a rule that allows the OpenVPN client to communicate with devices on the local network. I know this lule must be the 4th rule. Current ACLs:
1 Reject all other countries (not tested with other countries IPs)
2 Omada (works)
3 Plex (works)
4 Reject all connections IPv4 (works, problematic with OVPN)
5 The same v6 (works)
With rule 4th tunnel 'works', has local IP, but communication doesen't work, on both sides is visible
Modification ovpn file (comp-lzo) won't work
- Copy Link
- Report Inappropriate Content
Never mind. I forgot to set up an IP group for ACL purposes. That's what happens when you do it at 2-3 a.m. after work. Now works fine.
| Index | description | direction | politics | protocols | source | target |
|---|---|---|---|---|---|---|
| 4 | AllowLAN | WAN IN | Allow | All | Allowed networks* | IPGroup_Any |
| 5 | DenyAll | WAN IN | Deny | All | IPGroup_Any | IPGroup_Any |
*local subnets
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 167
Replies: 3
Voters 0
No one has voted for it yet.