Business Community > Controllers > LLDP Topology not correct after Upgrade to 6.24
< Controllers

LLDP Topology not correct after Upgrade to 6.24

LLDP Topology not correct after Upgrade to 6.24

LLDP Topology not correct after Upgrade to 6.24
LLDP Topology not correct after Upgrade to 6.24
a week ago
Tags: #Controller #Firmware Update
Model: Omada Software Controller (Linux)  
Hardware Version:
Firmware Version: 6.0.0.24

hi,

 

it is an software controller, installed was the latest 5.15. version. with the 5.15.x lldp was working fine.

There is an ALE Switch OS6360-P24, thats the Root-Switch. LLDP is configured and it was working fine until i upgraded the controller version 6.24 

 

 

 

  0      
 
  0      
 
#1
Options
5 Reply
Re:LLDP Topology not correct after Upgrade to 6.24
a week ago

Hi  @daniel_hainich 

 

Thanks for posting here.

 

Thank you for your feedback. We need to understand how your topology is actually connected. Or do you have a topology from the 5.15.24?

Additionally, could you confirm whether LLDP is enabled on the device? Thank you.

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#2
Options
Re:LLDP Topology not correct after Upgrade to 6.24
a week ago - last edited Tuesday

i confirm lldp ist enabled on all devices. i will send you a pm with a manually created topology map. for now, as you can see the controller calculate the accesspoint as uplink devices. thats ok for the mesh-ap´s but no for the switches.

 

 

@Vincent-TP

 

this is my topology. the dotted line are wifi-mesh.

 

 

  0  
  0  
#3
Options
Re:LLDP Topology not correct after Upgrade to 6.24
Wednesday

Hi  @daniel_hainich 

 

Thanks for the picture. 

Did you try to reboot the system? did it help? Please reboot the devices according to the following order:

router > uplink switch > controller > EAP > mesh EAP

 

One more question, where is the controller plugged to? the core switch?

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#4
Options
Re:LLDP Topology not correct after Upgrade to 6.24
Thursday
hi, i rebooted all devices multiple times. also in your suggested order. it does not help. my controller is software based and runs on proxmox. the proxmox host is connected to the OS6360, the first (left) switch in the topology screenshot (from controller). proxmox-host is also connected with 10G, the 1000FDX on Port18 is wrong.
  0  
  0  
#5
Options
Re:LLDP Topology not correct after Upgrade to 6.24
Yesterday

  @daniel_hainich 

 

Thank you so much for taking the time to post the issue on the TP-Link community!
To better assist you, I've created a support ticket via your registered email address and escalated it to our support engineer to look into the issue. The ticket ID is TKID251150341. Please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, please update this topic thread with your solution to help others who may encounter the same problem as you did.
Many thanks for your excellent cooperation and patience!

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 214

Replies: 5

Tags

Controller Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.