Good day. 

Our current hardware setup with all released stable versions of firmware applied:

ER605 v1.0    1.3.2
TL-SG2008 v3.0    3.0.13
SG2008P v3.20    3.20.13
TL-SG2008 v3.0    3.0.13
EAP245(US) v3.0    5.2.0
EAP235-Wall(US) v1.0    3.2.3
EAP110-Outdoor(US) v3.0    5.0.9

OC200 v1.0 1.36.7 Build 20250707 Rel.72474

We are getting quite a number of events logged with the "Client Connection changed (Wired)" and "Client Connection changed (Wireless)" type. I have searched the forum and see that these are perhaps caused by "network flapping" and how the system tracks certain traffic changes. Regardless of what is causing the Event to log, I would like to point up a few things.

• It appears there is no Event type for these events in the Notification area. As a result these events cannot be targeted to be suppressed or emailed.
• If you go to the Event log viewer screen and drop down the "Type" options window for filtering, there is no selection available for these event types so they cannot be filtered.
• If you go to the Event log viewer screen and drop down the "Type" options window for filtering and select all, these event types are filtered out since they "don't exist".
• If you go to the Event log viewer screen and use the Content filter, you cannot use the client name, but if you use the MAC of the client it works. 

Please add the "Client Connection Changed (Wired)" and "Client Connection Changed (Wireless)" Event types to the available Types such that they can be notified and filtered.

Please do not revert to showing the MAC address in the log. Having the client name in the log is a great improvement!! 

It would be nice to have the ability to use client name in the Content filter box.

I suppose part of this is a feature request, but am posting in the forum since I think there are missing filter selections which should be updated.

Thanks much!

Carl