Business Community > Gateways > ER605 - Block specifi UDP/TCP ports
< Gateways

ER605 - Block specifi UDP/TCP ports

ER605 - Block specifi UDP/TCP ports

ER605 - Block specifi UDP/TCP ports
ER605 - Block specifi UDP/TCP ports
Wednesday - last edited 18 hours ago
Tags: #ACL #Firewall
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.3.3 Build 20251029 Rel.18054

Hi!

I'm configuring an ER605 gateway and need to block specific UDP/TCP ports to avoid gaming traffic. Accessing the Firewall ACL configuration, I saw that is only possible to select some services, like SSH, FTP, SMTP, ... but I can't select to block some specific port.

 

How can I do it?

 

Thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ER605 - Block specifi UDP/TCP ports-Solution
18 hours ago - last edited 18 hours ago

Hi  @Estanislau 

 

Thanks for posting here.

Below are the steps:

1.  go to the Profile page to create the IP-Port Group as you need:

 

2. Create a new group> choose IP-Port Group

 

3. Go to Gateway ACL, create New ACL Rule:

 

4. You will see the created profile on both Source and Destination:

 

 

 

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:ER605 - Block specifi UDP/TCP ports
Wednesday

  @Estanislau Try creating a service type that blocks the specific ports you want, and then using that Service Type in the ACL rules under Firewall.

Check out our subreddit, r/Omada_Networks! Want to help test and give feedback on new products? Sign up for the US Enterprise Beta Program here! Need a ticket? Contact Technical Support
  0  
  0  
#2
Options
Re:ER605 - Block specifi UDP/TCP ports-Solution
18 hours ago - last edited 18 hours ago

Hi  @Estanislau 

 

Thanks for posting here.

Below are the steps:

1.  go to the Profile page to create the IP-Port Group as you need:

 

2. Create a new group> choose IP-Port Group

 

3. Go to Gateway ACL, create New ACL Rule:

 

4. You will see the created profile on both Source and Destination:

 

 

 

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#3
Options
Re:ER605 - Block specifi UDP/TCP ports
7 hours ago
Thank you so much!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 76

Replies: 3

Tags

ACL Firewall
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.