T1600g-28PS as trunk behind cisco 3750g muliple vlans
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T1600g-28PS as trunk behind cisco 3750g muliple vlans
Model :
Hardware Version :
Firmware Version :
ISP :
Hi all
I bought a T1600g-28P becouse the old switch had some problems with his peo and fan's.
That was a Cisco 29XX and was years always working with the core switch that is a Cisco 3750g.
So went to the store yes old school just go to a store (Smile)
And bought theT1600g-28P
but after 2 days pulling my hair out of frustration it is not that funny any more
My config
Cisco asa 5600 - Cisco 3750 - T1600g-28P
port 24 is a Trunk port on the cisco and management is VLAN1 also on the Tp-link port 24 untag and spanning tree is on
Vlan1 Manegement
VLAN 20 Office
VLAN 30 Wifi
VLAN 40 Printer
VLAN 45 Server
All VLANs have DHCP from the asa
So far so good
But mybe years after years use Cisco i think Wrong
What i try is to set a trunk on the TP-Link but it is just not working the 2 switches will not see one or the other ore the other cisco is 10.10.100.20 tp link is 10.10.100.21.
The Asa also do not see the Tp-link switch
All vlans are taged and this sould work.
But no id i try and read a lod but can not find a hands on that is not with your old web interface.
In the old interface the is a button member or not and eff a option to set up a trunk
But mot in my interface
firmware is 2.0.0
Somebody a id what the ... i do wrong?
Hardware Version :
Firmware Version :
ISP :
Hi all
I bought a T1600g-28P becouse the old switch had some problems with his peo and fan's.
That was a Cisco 29XX and was years always working with the core switch that is a Cisco 3750g.
So went to the store yes old school just go to a store (Smile)
And bought theT1600g-28P
but after 2 days pulling my hair out of frustration it is not that funny any more
My config
Cisco asa 5600 - Cisco 3750 - T1600g-28P
port 24 is a Trunk port on the cisco and management is VLAN1 also on the Tp-link port 24 untag and spanning tree is on
Vlan1 Manegement
VLAN 20 Office
VLAN 30 Wifi
VLAN 40 Printer
VLAN 45 Server
All VLANs have DHCP from the asa
So far so good
But mybe years after years use Cisco i think Wrong
What i try is to set a trunk on the TP-Link but it is just not working the 2 switches will not see one or the other ore the other cisco is 10.10.100.20 tp link is 10.10.100.21.
The Asa also do not see the Tp-link switch
All vlans are taged and this sould work.
But no id i try and read a lod but can not find a hands on that is not with your old web interface.
In the old interface the is a button member or not and eff a option to set up a trunk
But mot in my interface
firmware is 2.0.0
Somebody a id what the ... i do wrong?