TL-SG3424P V2 LACP
Hi all,
I am trying to create a LAG (LACP) between two TL-SG3424P switches using 4+4 TL-SM311LS SFPs. I have added ports 21,22,23,24 to the same admin key and created a LAG.
My problem is that the switches accept only two members each time 21+22 or 23+24 or 22+23, 21+24 etc. Never 3 or 4 connections, only pairs.
What can I do ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi Costas
You can try to setup the static LAG, check wether can work normally.
And you can put up the screenshots of the configuration if you are convenient, then we can check if the configuration is correct.
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for the reply.
Static LAG does not change the problem though.
Here is my config.
Switch 1:
Switch2:
- Copy Link
- Report Inappropriate Content
Hi Costas
Did you connect other Pcs on port 21-24 Ethernet ports?
TL-SG3424P have 4 Combo SFP Slots, If you use Etherent port and SFP port at the same time, the corresponding port can not be used.
In my opinion, this case may be relate with Combo port.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
It seems to be a bug. Try to write to technical support, but this model is EOL already...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1404
Replies: 5
Voters 0
No one has voted for it yet.