Omada Software Controller v4.4.3 has been released on July 1, 2021

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada Software Controller v4.4.3 has been released on July 1, 2021

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada Software Controller v4.4.3 has been released on July 1, 2021
Omada Software Controller v4.4.3 has been released on July 1, 2021
2021-09-16 12:19:19 - last edited 2022-12-15 03:47:50

This Article Applies to:

 

Omada Software Controller v4.4.3

 

  •  Supported OS: Windows or Linux (64bits recommended

 

Release Notes:

 

Some new functions have been added on the Omada Software Controller v4.4.3, which will require both the Controller and the Omada SDN Devices' firmware to support accordingly.

 

  • New Feature/Enhancement

 

For Controller:

1) Add the User Experience Improvement Program.

2) Add DST (Daylight Saving Time) logo on the page during DST, and fix the bug that DST causes the schedule to be executed one hour later.

3) Add and optimize the Help for some features.

4) Update the icons for some models.

5) Switch the default state of SNMP to be disabled.

6) Optimize the Automatic Upgrades feature to cope with the situation where the firmware is withdrawn.

7) Optimize the processing for modifying the device accounts.

8) Optimize the upgrading process to avoid failure.

9) Optimize the notification page for the expired link of “Reset Password”.

10) Optimize the time settings for Auto Backup.

11) Optimize the Portal redirection mechanism.

12) Optimize the setup of Access Control, 802.1X, MAC-Based Authentication and RADIUS Profile.

13) Add support to Import Site with Cloud Access.

14) Optimize the processing mechanism for multiple requests via Cloud Access.

15) Improve the compatibility with Internet Explorer 11 when accessing the “Export Data” feature via the Cloud Access.

 

For Gateway:

1) Add VPN Client status to the VPN Status page. -> it requires the gateway firmware to support

2) Allow modifying the LAN IP before adopting the Omada Gateway, simplifying configuration process. Mentioned HERE.

3) Add support to reset the parameters of the Firewall and Attack Defense.  -> it requires the gateway firmware to support

4) Update the validation rules for the Username and Password of PPPoE.

5) Optimize the export of the OpenVPN certificate.

6) Optimize the configuration of UPnP.

7) Optimize the Error Notification of the incorrect IPv6 settings.

8) Optimize the notification for the DHCP range when setting up DHCPv6.

9) Add alert when VPN users exceed the number limit.

10) Optimize the Speed Test to improve the success rate.

 

For Switch:

1) Add support to set up the link speed to 5 Gbps.

 

For EAP:

1) Add AI RF Planning feature (Cloud-Based Controller only).

2) Add support for 160 MHz channel width, which requires device support.

 

  • Bug Fixed

 

For Controller:

1) Fixed the bug that the Controller incorrectly recognized the login requests and caused the login failure.

2) Fixed the bug that some advanced features failed to be migrated with Site Migration, such as ACL, Static Route, Policy Routing, SSH, and VPN settings.

3) Fixed the bug that the timelines were inverted on Speed Test Statistics and some Dashboard cards. Mentioned HERE.

4) Fixed the bug that the start and endpoints of the timeline on the “ISP Load” card didn’t match the set time range.

5) Fixed the bug that the client was redirected to the wrong IP address by the External Web Portal or Facebook Wi-Fi when the client was in a different network from the Controller

6) Fixed the bug that the subdirectory (“/”) was not allowed in the Promotional URL. Mentioned Here and Here.

7) Fixed the bug that the wired clients failed to authenticate through the External Web Portal.

 

For Devices:

1) Fix the bug that the PoE Out feature was disabled after upgrading to Omada SDN Controller V4.3.5.

2) Fix the bug that the Controller failed to deal with the PD Class of the clients.

 

  • Supported device models and firmware

 

Omada EAP:

EAP110_V4 3.20.0 Build 20200525 Rel.36899 and above
EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above
EAP225_V3 2.20.0 Build 20200422 Rel.70513 and above
EAP245_V3 2.20.0 Build 20200423 Rel.36779 and above
EAP115-Wall_V1 1.20.0 Build 20200509 Rel.63986 and above
EAP225-Wall_V2 1.20.0 Build 20200422 Rel.70504 and above
EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel.33388 and above
EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel.70543 and above
EAP660 HD, EAP620 HD, EAP615-Wall, EAP610, EAP610-Outdoor,
EAP265 HD, EAP235, EAP230-Wall, EAP235-Wall

 

Omada Switch:

TL-SG3452P, TL-SG3452, TL-SG3428XMP, TL-SG3428MP, TL-SG3428,
TL-SG3428X, TL-SG3210XHP-M2, TL-SG3210 V3, TL-SX3206HPP,
TL-SX3016F, TL-SX3008F, TL-SG2428P, TL-SL2428P V4.2, TL-SG2218,

TL-SG2210MP, TL-SG2210P V3.2, TL-SG2008P, TL-SG2008 V3 and above.

 

Omada Gateway:

ER605 (TL-R605), ER7206 (TL-ER7206)

 

  • Notes


1) Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
2) If you are using an old Controller and plan to upgrade to this version, please follow the Omada Controller Upgrade Guide.

3) Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.14 or below.

4) This version of the controller is applied to the Omada APP of version 3.0.X or above.

 

 

Download Link:

 

Omada_SDN_Controller_V4.4.3_linux_x64.tar.gz

Omada_SDN_Controller_V4.4.3_linux_x64.deb

Omada_Controller_V4.4.3_Windows

 

To get the latest firmware release for Omada Controller, welcome to Subscribe & Bookmark to this post.

 

 

Feedback:

 

If you have any further feedback on the new firmware, please feel free to start a new thread from HERE.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

-- Omada Controller version (previous and current)

-- Device Model(s) and Hardware

-- Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0      
  0      
#1
Options