OC200 new firmware v5.0.29 for v1.1 only?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 new firmware v5.0.29 for v1.1 only?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 new firmware v5.0.29 for v1.1 only?
OC200 new firmware v5.0.29 for v1.1 only?
2021-12-24 11:31:43 - last edited 2021-12-27 15:45:41
Model: OC200  
Hardware Version: V1
Firmware Version: 1.9.3 Build 20210914 Rel.39903

Hello,

will there also be a new fw for OC200 version 1.0?

Pavel

  0      
  0      
#1
Options
1 Accepted Solution
Re:OC200 new firmware v5.0.29 for v1.1 only?-Solution
2021-12-27 03:02:29 - last edited 2021-12-27 15:45:41

Dear @PavelV,

@Philbert is correct yes. Due to log4j vulnerability, the new firmware v5.0.29 for OC200 v1.0 has been released to the official website directly bypassing the cloud to speed up the firmware release process. So you didn't find this new firmware by the Check for Update option. This new firmware will be released to the cloud shortly to allow the auto-upgrade.

 

You can follow this post as @Philbert sent earlier to do a manual upgrade, or wait for the auto-upgrade patiently.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#5
Options
7 Reply
Re:OC200 new firmware v5.0.29 for v1.1 only?
2021-12-24 14:12:11

@PavelV 

 

To my knowledge there is no v1.0 of the OC200...  

 

I have installed SDM v5.0.29 on my OC200 v1.0 without issue.. link below

 

https://community.tp-link.com/en/business/forum/topic/515912

 

  0  
  0  
#2
Options
Re:OC200 new firmware v5.0.29 for v1.1 only?
2021-12-25 13:05:24

@Philbert 

Hello,

Thank you for answer. Why doesn't the "check for upgrade" button look for anything? Do I have to upgrade manually? I'm afraid something will go wrong.

Pavel

 

 

  0  
  0  
#3
Options
Re:OC200 new firmware v5.0.29 for v1.1 only?
2021-12-25 16:45:45

@PavelV 

 

Yeah it didnt come via the auto update for me either, likely as its only newly released and was pushed out faster than usual due to the Log4 bug.  Pretty sure it will come eventually.

 

If you want to install it use the link i sent you earlier and download the image, point your OC200 to this and it will update.   If you would rather wait for it to auto-update then thats fine too

 

There is no more risk associated with manual update vs auto update, its the same process underneath.

 

 

  2  
  2  
#4
Options
Re:OC200 new firmware v5.0.29 for v1.1 only?-Solution
2021-12-27 03:02:29 - last edited 2021-12-27 15:45:41

Dear @PavelV,

@Philbert is correct yes. Due to log4j vulnerability, the new firmware v5.0.29 for OC200 v1.0 has been released to the official website directly bypassing the cloud to speed up the firmware release process. So you didn't find this new firmware by the Check for Update option. This new firmware will be released to the cloud shortly to allow the auto-upgrade.

 

You can follow this post as @Philbert sent earlier to do a manual upgrade, or wait for the auto-upgrade patiently.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#5
Options
Re:OC200 new firmware v5.0.29 for v1.1 only?
2021-12-27 13:12:34

@Fae 

Hello,

thank you very much.

Please check fw, will the update be done correctly or do I have to take further action?

 

TL-R605 v1.0   fw:1.1.1 Build 20210723 Rel.64608

TL-SG2008P v1.0  fw:1.0.2 Build 20210806 Rel.55686

EAP245(EU)v3.0 fw:5.0.3 Build 20210604 Rel. 51934

EAP225-Outdoor(EU) v1.0 fw:5.0.5 Build 20210604 Rel. 51118

OC200 v1.0   fw:1.9.3 Build 20210914 Rel.39903 contr.ver. 4.4.6

  0  
  0  
#6
Options
Re:OC200 new firmware v5.0.29 for v1.1 only?
2021-12-27 13:32:55

I still found a newer fw for EAP245 v3 on the web. 

I upgraded it to 5.0.4 Build 20211021 Rel. 57494

  0  
  0  
#7
Options
Re:OC200 new firmware v5.0.29 for v1.1 only?
2021-12-27 15:45:22

Hello,

I updated OC200 fw, all working fine. 

Thanks to all for your help

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1273

Replies: 7

Related Articles