OC200 cloud controller, and ER605 few issues need help with!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 cloud controller, and ER605 few issues need help with!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 cloud controller, and ER605 few issues need help with!!
OC200 cloud controller, and ER605 few issues need help with!!
2022-01-06 19:53:54 - last edited 2022-01-14 01:17:14

Ok so I am having a few problems with my setup that desperatley need some help with. I have a ER605 gigbit router (v1) with omada OC200 cloud controler, 1 EAP66600, and 2 EAP245. I have ensured all items are updated to the latest firmware.

 

My ISP uses Arris modem, it is bridged for our static IP, and the Wan port 1 of my router is confiured properly to work with my assigned static IP. The router in the controller is in a perpetual loop - Heartbeat missed - adopting - provinsioning - connected (This loop happens every few minutes). when this loop happens only wireless clients loose internet acesss, my hardwired connections are solid. So the router does not seem to reboot, and the time online for the device in the controler is correct to the other devices.

 

Now for the strange part. While trying to chase down this issue and decipher whether it is an issue with the router or my ISP modem, I had an old D-link router that was used previously to me upgradeing the network. I configured Wan2 of the ER605 for DHCP failover, connected a line from the 605 to the dlink, and the dlink's wan port configured to static ip and connected to the ISP modem. The perpetual loop still contiunes, but now it is roughly every 7-10 minutes, but not loss of internet for any clients wireless or wired.

 

The other oddity logged in locally to the controller it does not show the gateway stats, but login via the cloud gateway is dispalyed along with stats.

 

Anyone able to provide some help.

  0      
  0      
#1
Options
1 Accepted Solution
Re:OC200 cloud controller, and ER605 few issues need help with!!-Solution
2022-01-13 13:45:30 - last edited 2022-01-14 01:17:14

@Slowjoe6969 

 

After a few hours with no one in the office, I found the culprit. In a closet someone installed an old router as a switch, this router's DHCP range was the same as the ER605. I have removed the rouge device and installed a proper switch and this has solved the issues of the ER605 in a perpetual loop.

 

 

Recommended Solution
  3  
  3  
#7
Options
6 Reply
Re:OC200 cloud controller, and ER605 few issues need help with!!
2022-01-07 03:43:50

Dear @Slowjoe6969,

 

Slowjoe6969 wrote

Ok so I am having a few problems with my setup that desperatley need some help with. I have a ER605 gigbit router (v1) with omada OC200 cloud controler, 1 EAP66600, and 2 EAP245. I have ensured all items are updated to the latest firmware.

 

May I have the detailed firmware version of your Omada devices?

How are these devices connected in your setup?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:OC200 cloud controller, and ER605 few issues need help with!!
2022-01-07 13:53:34

@Fae 

 

The firmware versions are as follows;

 

OC200 - 5.0.29

ER605 - 1.1.1

EAP245's - 5.03

EAP600 - 1.0.0

 

All the devices are connected with new Cat6 cable (tested and verified with a cable tester, done early on to verify not a bad cable) the ER605 one lan port feeds a 24 port managed Aruba switch, another lan port feeds a TP-link unmanaged POE 5 port switch with powers the AP, and the Cloud controller. Everyhting is protected by a UPS to ensure consistant and safe power. switching the cables between the lan ports makes no change to how the system functions

 

We have tried isolating each POE device to it's own POE injector, the cloudn controller we switched to usb power on the back as well for troublshooting. but none of these make any changes to the way the equipment functions.

 

 

  0  
  0  
#3
Options
Re:OC200 cloud controller, and ER605 few issues need help with!!
2022-01-08 08:06:58

@Slowjoe6969 

Have you tried using software controller under the Windows/Linux?

  0  
  0  
#4
Options
Re:OC200 cloud controller, and ER605 few issues need help with!!
2022-01-08 13:53:39

@Slowjoe6969 

How is your WAN set on the TP-Link router,  PPPoE, Static or DHCP.    What is the MTU set at ?

  0  
  0  
#5
Options
Re:OC200 cloud controller, and ER605 few issues need help with!!
2022-01-10 08:18:43

Dear @Slowjoe6969,

 

Thank you for your valued information.

 

For your case, I'd like to escalate to the TP-Link support team who could help you more efficiently.
They will reach you via your registered email address shortly, please pay attention to your email box later.

Once the issue is addressed or resolved, I'd encourage you to share it with the community.
Many thanks for your cooperation and support!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#6
Options
Re:OC200 cloud controller, and ER605 few issues need help with!!-Solution
2022-01-13 13:45:30 - last edited 2022-01-14 01:17:14

@Slowjoe6969 

 

After a few hours with no one in the office, I found the culprit. In a closet someone installed an old router as a switch, this router's DHCP range was the same as the ER605. I have removed the rouge device and installed a proper switch and this has solved the issues of the ER605 in a perpetual loop.

 

 

Recommended Solution
  3  
  3  
#7
Options

Information

Helpful: 0

Views: 1585

Replies: 6

Related Articles