Business Community > All Threads > EAP 615-Wall: Can it mesh with another EAP?
< All Threads

EAP 615-Wall: Can it mesh with another EAP?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP 615-Wall: Can it mesh with another EAP?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 615-Wall: Can it mesh with another EAP?
EAP 615-Wall: Can it mesh with another EAP?
2022-06-06 20:43:23 - last edited 2022-06-07 18:15:11
Tags: #Mesh
Model: EAP615-Wall  
Hardware Version:
Firmware Version:

Hi,

 

For the EAP 615-wall, powered and thus with an ethernet backhaul, can I still use another EAP (eg, 610) to connect it wirelessly (Mesh) with the EAP-615?

 

Thanks.

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:EAP 615-Wall: Can it mesh with another EAP?-Solution
2022-06-07 02:28:51 - last edited 2022-06-07 18:15:14

  @AvidLearner 

 

I looked it up, and none of the 'Wall' APs support meshing...which is a HUGE shame in my books.  (p.15 of 42 if you care)

 

https://static.tp-link.com/upload/product-overview/2022/202206/20220606/EAP%20Datasheet.pdf

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#2
Options
Re:EAP 615-Wall: Can it mesh with another EAP?-Solution
2022-06-07 15:36:35 - last edited 2022-06-07 18:15:11

  @AvidLearner 

 

The latter, and yes, very disappointing to me too.  None of the 'wall' units have the feature...I have a 235-Wall I'd love to use as the uplink node, but no.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#5
Options
7 Reply
Re:EAP 615-Wall: Can it mesh with another EAP?-Solution
2022-06-07 02:28:51 - last edited 2022-06-07 18:15:14

  @AvidLearner 

 

I looked it up, and none of the 'Wall' APs support meshing...which is a HUGE shame in my books.  (p.15 of 42 if you care)

 

https://static.tp-link.com/upload/product-overview/2022/202206/20220606/EAP%20Datasheet.pdf

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#2
Options
Re:EAP 615-Wall: Can it mesh with another EAP?
2022-06-07 03:46:34

  @AvidLearner 

no. like the post i replied in another one

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#3
Options
Re:EAP 615-Wall: Can it mesh with another EAP?
2022-06-07 15:28:53

@d0ugmac1 , @Tedd404 Thanks for the replies.

But does that mean the 615 just cannot be connected as mesh?

If the 615 is wired, can we still link other mesh APs to it wirelessly or will that still not be possible? (that will be a huge dissapointment...).

  0  
  0  
#4
Options
Re:EAP 615-Wall: Can it mesh with another EAP?-Solution
2022-06-07 15:36:35 - last edited 2022-06-07 18:15:11

  @AvidLearner 

 

The latter, and yes, very disappointing to me too.  None of the 'wall' units have the feature...I have a 235-Wall I'd love to use as the uplink node, but no.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#5
Options
Re:EAP 615-Wall: Can it mesh with another EAP?
2022-06-07 18:51:35

@d0ugmac1 

I have a place where I have only 1 ethernet cable coming to the room and where I will need to connect 1 AP (#1) and 1 wired client. And eventually (not needed now, but might be needed in the future) connect wirelessly another AP (#2) in the downstream. So #1 will be the uplink of #2.

I was hoping to use the 615-wall as the AP#1 in order to use the extra ethernet ports it provides... but if it can't mesh with other APs, it will not work for me in the future.
 

I guess solution is to use the EAP-610 and just a dummy L2-switch with PoE passthrough (if that even exists...)?
Any suggestion of a cheap one? (no need for many ports)

Or will I be forced to use an electric socket there? (either powering a L2-switch w/ PoE (just not passthrough) or via a PoE injector for that EAP).

 

Thanks again in advance!

  0  
  0  
#6
Options
Re:EAP 615-Wall: Can it mesh with another EAP?
2022-06-07 19:03:50

  @AvidLearner 

 

I would keep the 615-Wall.  Power it with a POE+ injector (Ubiquiti makes a very cheap and cheerful POE+ for C$15--when in stock).  You can the plug your wired device into one of the 3 LAN ports and if it's just a POE device, you can plug it into the POE passthrough port (and your POE+ injector will power both the AP and the wired device).  To me that's so much cleaner than multiple devices and power modules.

 

In the future, you can either run a cable from another LAN port on the 615, or worst case, use a WiFi repeater unit which is slaved to the 615.  It won't be managed as an AP, but your client activity will be tracked as though they are connected to the 615.

 

I'm sure you have more nuances to the future state...but I don't see any silver bullets preventing you from proceeding with the 615-Wall as it's a helluva unit (ignoring that it can't mesh of course).

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#7
Options
Re:EAP 615-Wall: Can it mesh with another EAP?
2022-06-07 23:46:04

  @AvidLearner 

models work with fast roaming: https://www.tp-link.com/us/support/faq/2097/

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 2164

Replies: 7

Tags

Mesh
Related Articles
EAP 615 messing with other EAP units
351 0
Can EAP 615 wall be mounted surface-mounted without chiseling the wall?
219 0
EAP 615 Wall /proc/interrupts
513 0
Eap 615 in omsda mesh
662 0
TP Link EAP 615 Wall - Slow download speeds
1225 0
Mesh causing issee with EAP 615 device visibility
270 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.