I cant't use tp-link t1700g-28tq ' s default gateway for internet connection is it normal?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I cant't use tp-link t1700g-28tq ' s default gateway for internet connection is it normal?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I cant't use tp-link t1700g-28tq ' s default gateway for internet connection is it normal?
I cant't use tp-link t1700g-28tq ' s default gateway for internet connection is it normal?
2022-10-17 06:14:57
Model: T1700G-28TQ  
Hardware Version: V3
Firmware Version: 3.0.0

Hi,

I recently purchased tp-link tp-link t1700g-28tq switch for my home setup as i need port truncating in my nas. Previously i have never used a managed switch so i tried to learn fundamentals from internet but still a newbie. My current network diagram is like below.

 

 

I had to use the zxyel unmanaged switch in between as it has 2.5g ports (My computer supports 2.5g max). System is working fine like this.My computer is setup for vlan 10 and virtual server 1 is vlan 10. I can access internet and virtual server 1. However my question is, i saw ppl setting up default gateway switch's ip while creating vlans for example in this example 192.168.10.1 but when i setup like that i cant access the internet. I am forced to use router's gateway. Is it normal or should i make some other changes?

 

Here are my setups in the switch:

 

Vlans:

 

Interfaces:

 

 

Routing Table:

 

 

 

 

Also i added static routing like below but it didn't make any difference:

 

  0      
  0      
#1
Options
2 Reply
Re:I cant't use tp-link t1700g-28tq ' s default gateway for internet connection is it normal?
2022-10-18 08:35:01

  @orfenegro 

 

The gateway IP is 192.168.1.X, but the switch's IP is 192.168.0.X and 12.168.10.x, they are in the different subnet, can not communicate with each other, suggest you keep the default 192.168.1.X subnet on the switch.

Check this:

How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:I cant't use tp-link t1700g-28tq ' s default gateway for internet connection is it normal?
2022-10-18 23:34:39

  @Virgo 

Hi Virgo,

My switch default ip adress was 192.168.0.1, i didnt change it i just added 192.168.10.1 extra. When i set my computer ip like 192.168.10.70 and gateway 192.168.1.1 and netmask 255.255.0.0 i can see it through asus router's interface and i can both go internet and access other computers in the lan, (My router netmask is 255.255.0.0) So if it was subnet issue, i shouldnt be able to access router either with 192.168.10.70 ip. Am i wrong?

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 498

Replies: 2

Related Articles