Routing between FRITZ!Box and lokal LAN over TP-Link ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Routing between FRITZ!Box and lokal LAN over TP-Link ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Routing between FRITZ!Box and lokal LAN over TP-Link ER605
Routing between FRITZ!Box and lokal LAN over TP-Link ER605
2022-12-02 13:00:40 - last edited 2022-12-03 08:59:49
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version:

hello community,

 

I'm using the TP-Link ER605 as a multi-WAN router.
It is configured in such a way that if the DSL line (FRITZ!Box 7590) fails, it automatically makes a fallback to the FRITZ!Box 7490. That works quite well.

 

Now I would like to be able to access the local LAN with devices that are connected to the FRITZ!Box 7590 directly or via VPN. How or what do I have to set that in the ER605 router?

I have already made several attempts with static routes, unfortunately all unsuccessful.

 

Greetings

Superfunk

 

  0      
  0      
#1
Options
2 Reply
Re:Routing between FRITZ!Box and lokal LAN over TP-Link ER605
2022-12-05 05:57:09

  @Superfunk 

 

Not sure. I don't think it is possible for NAT router.

  0  
  0  
#2
Options
Re:Routing between FRITZ!Box and lokal LAN over TP-Link ER605
2022-12-05 22:39:17

  @Superfunk 

 

Hi,

it works if you can the Fritz!Box set in Bridge Mode.

I Have a Cable Fritz!Box 6591 Cable with Vodafone Cable Max1000 in Germany Hessen.

My ER605 works fine behind the Fritz!Box 6591 Cable.

In Bridge Mode the Fritz!Box work same a Modem.

But it works only with a "Comfort Anschluss" that you got 3 WAN IPv4 adress 2 for Telephone and one for Internet.

 

For control the Fritz!Box you have to set a Static Route in the Fritz!Box and connect it with a second LAN in a other IP-Range.

 

Greetings Thorsten.

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 1711

Replies: 2

Related Articles