VLAN's can't access each other anymore

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VLAN's can't access each other anymore

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VLAN's can't access each other anymore
VLAN's can't access each other anymore
2023-01-04 14:25:25 - last edited 2023-01-04 23:44:21
Tags: #Firmware Update #support
Model: OC200  
Hardware Version: V1
Firmware Version: 1.21.7 Build 20221206 Rel.58608

I have VLAN networks configured but or some reason I can't access VLAN to VLAN I've disabled all ACL rules thinking that was it but still can't get from one to another. I also recently upgraded my switches. What could be the issue?    Also why don't my EAP's show up in port configurations on switches?

 

OC200

 

ER605

 

TL-SG2210MP v1.0 Build 20221130 Rel.42340

TL-SG2008P v3.0 Build 20221130 Rel.42340

TL-SG2218 v1.0 Build 20221130 Rel.42340

 

192.168.50.1/25  VLAN 600        

192.168.55.1/24 VLAN 10

192.168.25.1/25. VLAN 444

           

Mgt LAN.

192.168.0.10/24 VLAN 1

           

10.10.1.1/24  VLAN 99           

192.168.12.1/24. VLAN 12

  0      
  0      
#1
Options
6 Reply
Re:VLAN's can't access each other anymore
2023-01-05 08:27:14

  @Orcus does your port allow all those VLAN? also try checking your LAN setup which port does it use for those VLAN.

  0  
  0  
#2
Options
Re:VLAN's can't access each other anymore
2023-01-05 16:16:38

  @Jeesoon1 

 

This is a bug, yes all switches are open to all VLANS, I have even reset all ports to use all profiles and I've deleted all ACL rules which means each VLAN should be able to reach on another. I've even reboot all devices and still can't get from one to another.

  0  
  0  
#3
Options
Re:VLAN's can't access each other anymore
2023-01-06 02:06:44

  @Orcus Just going to ask a basic question to clarify since you didn't say it outright.  Did the VLAN config work and EAPs show prior to the switch upgrade, or prior to some other change?  And when you say the EAPs don't show in the port config, are you saying the port icon is gray (instead of green) or is it not showing a name that you want there?

  0  
  0  
#4
Options
Re:VLAN's can't access each other anymore
2023-01-06 08:16:07

  @JoeSea 

 

It's the ER605 doing routing on your local network VLANs, not the switch. It's ahrd to believe it is related to the switch firmware...

 

Make sure there is no gateway ACL on your controller, and the router is "connected" status on the controller.

  0  
  0  
#5
Options
Re:VLAN's can't access each other anymore
2023-01-06 16:48:13

  @Somnus 

 

I would agree as I have rolled back the switches and the controller but problem still persists. Yes I have no gateway ACL or switch ACL's, should I just reset the router firmware not sure how this happened all of a sudden.

 

ER605 v1     firmware 1.2.1 Build 20220512 Rel.76748

  0  
  0  
#6
Options
Re:VLAN's can't access each other anymore
2023-01-09 03:49:28

  @Orcus 

What will happen if you reset the gateway and re-adopt it?

 

And if you add a new test VLAN, will that work(can ping to other VLANs)?

 

I did not see this problem on my ER605-SG2008P system, so I guess it could be something like a bug not always happen. I would try reset/reconfigure if it happens to me.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 780

Replies: 6

Tags

Related Articles