Business Community > All Threads > ER605 LT2P VPN is not routing through VPN
< All Threads

ER605 LT2P VPN is not routing through VPN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 LT2P VPN is not routing through VPN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 LT2P VPN is not routing through VPN
ER605 LT2P VPN is not routing through VPN
2023-02-15 19:47:02 - last edited 2023-02-17 08:36:03
Tags: #VLAN & Multi-Networks #VPN #Load Balancing
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20210723 Rel.64608

Trying to setup all devices on LAN to use VPN to route all outbound packets.

 

(Router is load balancing two WANs, so setting up VPN on both)

 

Configured the "L2TP Client" settings.  For "Remote Subnet", I'm using 0.0.0.0/0 as I want everything outbound routed through the VPN.

 

But, nothing is being routed.  The "tunnel list" is empty.

 

How lost am I?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ER605 LT2P VPN is not routing through VPN-Solution
2023-02-17 05:28:38 - last edited 2023-02-17 08:36:03

Dear @blackburied ，

 

Okay, I see.

Then I think we find the point.

If you set ER605 as a VPN Client, you need to add the Policy routing to achieve that.

Go to Transmission----Routing----Policy Routing, add a rule and choose "VPN Tunnel" in WAN box.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#4
Options
4 Reply
Re:ER605 LT2P VPN is not routing through VPN
2023-02-16 09:17:46

Dear @blackburied ,

 

blackburied wrote

Trying to setup all devices on LAN to use VPN to route all outbound packets.

(Router is load balancing two WANs, so setting up VPN on both)

Configured the "L2TP Client" settings.  For "Remote Subnet", I'm using 0.0.0.0/0 as I want everything outbound routed through the VPN.

But, nothing is being routed.  The "tunnel list" is empty.

 

Thank you so much for taking the time to report the issue to our community!

 

Could you please share a screenshot to show the empty Tunnel list?

Because if the tunnel list you said like below, it means no VPN clients connect to this ER605 VPN Server.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:ER605 LT2P VPN is not routing through VPN
2023-02-16 16:28:54

empty tunnel list  @Hank21 You say "it means no VPN clients connect to this ER605 VPN Server.".  I'm not setting-up the router as a VPN server, rather, as a client.

 

  0  
  0  
#3
Options
Re:ER605 LT2P VPN is not routing through VPN-Solution
2023-02-17 05:28:38 - last edited 2023-02-17 08:36:03

Dear @blackburied ，

 

Okay, I see.

Then I think we find the point.

If you set ER605 as a VPN Client, you need to add the Policy routing to achieve that.

Go to Transmission----Routing----Policy Routing, add a rule and choose "VPN Tunnel" in WAN box.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#4
Options
Re:ER605 LT2P VPN is not routing through VPN
2023-02-17 08:28:46

  @blackburied Woohoo!  Thank you, that looks to have worked

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1708

Replies: 4

Tags

VLAN & Multi-Networks VPN Load Balancing
Related Articles
ER605 vpn routing
702 0
Open VPN - No routing
4561 1
Policy VPN Routing (Specific traffic down the VPN)
982 0
ER605 does not retry VPN connection
1790 0
Site to Site VPN ER605
196 0
ER605 - IPSec VPN / Remote Subnets & Adopting ER605 to remote OC200
1081 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.