adding an 2nd loacation - error after adopting
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
has anyone here managed to implement exactly the situation described in the FAQ?
Currently, the controller is running locally at one location with an ER605 gateway. Now another location is to be added, also with an ER605 - but with a USB stick (E8732 from Huawei).
It works until the 3rd step, adoption. Until then it runs in standalone mode with working internet via the stick. After the 3rd step, the message appears that provisioning and configuration are in progress. After that, in the controller, it is disconnected ("[...]was disconnected") after approx. 11 minutes and the Internet at location 2 no longer works. This means I can no longer access the ER605: I can switch to the web interface of the ER605 of the second location at the end. The message appears that this gateway is managed by a controller. The only possibility here is to perform a reset.
In step two, I tried it via DHCP option 138 as well as via the informer URL.
Link to the FAQ: https://www.tp-link.com/no/support/faq/3087/
Thanks and greetings
Christian
@shberge Thanks for your quick reply.
The second location is currently still without internet. Therefore, it is not yet a "huge problem". :-)
Here is a screenshot of the settings for the Internet of the second location; I mean that I have preset or prepared it with this. The USB stick establishes the internet connection as soon as it gets power or is started. (The first location is connected via WAN).
