@grax 

 

Upgrade router to 1.3.0

 

What router do you have in the remote end of VPN?

ER7206 too. OK i upgrade now. hmm DH settings 1,2,14 etc have meaning for transfer speed?

  @grax 

 

Du you use the router in stand alone or controller?

in stand alone there mybee not same screen

but you ned 1.3.0 sotware to get it to work with sha2 anyway.

Ok i have 1.3.0 and SHA256 :) U tested the best settings for best speed IPSEC? Settings from your screen is the best ? SHA256 AES256 DH14 ??

  @grax 

 

Yes on ER605v2 not ER7206.

 

best speed on ER7206 is prety mutch what you have.. sorry but you can test with SHA256 and EAS256 dh14 to se difference.

 

on ER7206 I use SHA1 AES256 and dh2 for best speed.

So in ER7206 V1 u have 3mb/s too max ?

  @grax 

 

Yepp 1-10 up and down up and down on the speed, but most about 3MB/s, Picture with 32MB/s was from ER605v2 to show the difference.

 

  @grax 

 

so briefly explained, you want faster VPN then replace ER7206 with an ER605v2 or ER8411, I haven't tested it but ER707-M2 should be good too

 

  @grax 

 

I get this from TP-Link support just now

 

Dear customer,

 

Yes, ER707-M2’s IPSec throughput is a lot better than ER7206 v1.

Max performance is around 600-800Mbps when using SHA1-AES128, SHA256 has similar performance as well.

 

Thanks!