Routing one device to a one specific WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Routing one device to a one specific WAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Routing one device to a one specific WAN
Routing one device to a one specific WAN
2023-09-15 21:46:47 - last edited 2023-09-18 02:20:26
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.3.0

Hello everyone

I have a simple situation where I need a specific device having a MAC Address of XX-XX-XX-XX-XX and IP 192.168.0.191 to always use WAN1.

I have seen some documentation but for some reasons I am unable to follow as they are not very detailed. 

Can someone please direct me in details into this.

I need the routing rule to be based on the MAC Address.

Thank you 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Routing one device to a one specific WAN-Solution
2023-09-18 02:07:48 - last edited 2023-09-18 02:09:08

Hi @WSK 

Thanks for posting in our business forum.

The function you asked for is called Policy Routing.

You can refer to the User Guide for configuration. Or FAQ: How to configure Policy Routing on Dual WAN Router using the new GUI

 

Since the MAC address cannot be used in the IP Group in this article above(because it is layer 2), you can use IP-MAC binding first and then set this specific IP to the group and use the Policy Routing.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Routing one device to a one specific WAN-Solution
2023-09-18 02:07:48 - last edited 2023-09-18 02:09:08

Hi @WSK 

Thanks for posting in our business forum.

The function you asked for is called Policy Routing.

You can refer to the User Guide for configuration. Or FAQ: How to configure Policy Routing on Dual WAN Router using the new GUI

 

Since the MAC address cannot be used in the IP Group in this article above(because it is layer 2), you can use IP-MAC binding first and then set this specific IP to the group and use the Policy Routing.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 881

Replies: 1

Related Articles