Business Community > All Threads > Omada SDN Controller_V5.13 Beta (Updated on Feb 22nd, 2024) [Thread Closed]
< All Threads

Beta Software Omada SDN Controller_V5.13 Beta (Updated on Feb 22nd, 2024) [Thread Closed]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

Beta Software Omada SDN Controller_V5.13 Beta (Updated on Feb 22nd, 2024) [Thread Closed]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Beta SoftwareOmada SDN Controller_V5.13 Beta (Updated on Feb 22nd, 2024) [Thread Closed]
Omada SDN Controller_V5.13 Beta (Updated on Feb 22nd, 2024) [Thread Closed]
2023-10-08 05:38:12 - last edited 2024-02-23 02:30:06
Tags: #Firmware Update #Official

Update as of Feb 22nd, 2024:

 

The 5.12 beta has been updated to official release, and this early access post is locked for further replies.

 

Omada Software Controller_V5.13.22 (Released on Nov 23rd, 2023)

Omada Hardware Controller_V5.13.24 (Released on Feb 22nd, 2024)

 

Any further questions or assistance needed with Omada SDN Controller, please feel free to contact TP-Link Tech Support by submitting a support ticket or connect with community by clicking Start a New Thread in the Business Community forums.

 

 

This Article Applies to

 

Omada_SDN_Controller_v5.13.22 Windows (Windows 7/8/10/11/Server, 64bit Recommended)

Omada_SDN_Controller_v5.13.10_Linux_x64.tar.gz (Ubuntu 16.04/18.04/20.04, Debian 8/9/10, CentOS 6/7)

Omada_SDN_Controller_v5.13.10_Linux_x64.deb (Ubuntu 16.04/18.04/20.04, Debian 8/9/10)

OC200(UN)_V1_1.28.1_Build 20231117 (Built-in Omada SDN Controller 5.13.24)

OC200(UN)_V2_2.13.1_Build 20231117 (Built-in Omada SDN Controller 5.13.24)

OC300(UN)_V1_1.21.1_Build 20231117 (Built-in Omada SDN Controller 5.13.24)

 

Overview

 

We hope to offer you with a chance to experience the new features added in the Controller v5.13 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including lettings us know about successful upgrades.

 

Release Notes

 

New Feature

 

1. Expanded Language Support: Added language support for Română, Български, Українська, Српски.

2. 2FA: Added support for Two-Factor Authentication (2FA) in Global view > Account Security, all accounts will be asked for extra authentication to log in for higher account security.

3. DPI: Added support for Deep Packet Inspection in Site view > Settings > Network Security > Application Control, which helps you to manage your network traffic through Application Layer. (except the OC200 and OC300)

4. Batch Delete VLAN: Added support for Batch Delete VLAN in Site View > LAN, which allows you to delete mutiple VLAN at once.

5. Remember Device: Added support for remember of devices in Site View > Devices-Sidebar > Config-General, which allows your Controller to remember this device and automatically adopt it after it is reset and being found by your Controller.

6. Application result: Added support for display of application result of devices configuration in Site View > Devcies.

 

Enhancement

 

1. Device: Added support for hyperlink of uplink and downlink devices, which will jump to specific devcie page after you click the link. Besides, support more downlink information display in Switch > Details.

2. Sorting Optimization: Optimized sorting for the following locations:

  • Firmware Version.
  • DHCP Reservation.
  • LAN Network.

3. Voucher Groups: Added support for code format of English Letters.

 

Notes

 

1. This version of the Controller is fully applied to the Omada APP of version 4.13 or above.

2. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.

3. For Windows OS, Java 8 (or OpenJDK-8) and above are required. How to install Java Runtime Environment (JRE) for Omada SDN Controller on Windows?

4. If you are upgrading from controller v3.x, it's highly recommended to upgrade 3.x to v4.1.5 first, then v4.1.5 to the latest 5.x. Please follow the Omada Controller Upgrade Guide in the installation package before upgrading.

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrade or downgrade.

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller

 

Firmware Download Link

 

  • Direct Download

 

    Omada_SDN_Controller_V5.13.22_Windows(Beta)

    Omada_SDN_Controller_v5.13.10_Linux_x64.deb(Beta)

    Omada_SDN_Controller_v5.13.10_Linux_x64.tar.gz(Beta)

    Omada_SDN_Controller_V5.13.22_Windows              

     Omada_SDN_Controller_v5.13.22_Linux_x64.deb    

     Omada_SDN_Controller_v5.13.22_Linux_x64.tar.gz

    OC200(UN)_V1_1.28.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24

     OC200(UN)_V2_2.13.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24
     OC300(UN)_V1_1.21.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24

    OC200(UN)_V1_1.28.2 Build 20240110     Full Release Note >

     OC200(UN)_V2_2.13.2 Build 20240110     Full Release Note > 

     OC300(UN)_V1_1.21.2 Build 20240110     Full Release Note >

 

  • Download From TP-Link Global "EN" Website:

    Omada Controller_Windows/Linux: https://www.tp-link.com/en/support/download/omada-software-controller

    OC200 v1/v1.6: https://www.tp-link.com/en/support/download/oc200/v1/#Firmware

    OC200 v2/v2.6: https://www.tp-link.com/en/support/download/oc200/v2/#Firmware

    OC300 v1/v1.6: https://www.tp-link.com/en/support/download/oc300/#Firmware

 

Additional Information

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

  • Omada Controller version (previous and current)
  • Device Model(s), Hardware and Firmware versions
  • (if possible) A copy of the Log file and Backup Config file

 

If you decide to downgrade the controller before reporting the issue to TP-Link, it's suggested to save a copy of the current Log file and Backup Config file before you do that, which could help to investigate and address the issue quickly.

 

>> How to get the Log file and Backup Config file for Omada SDN Controller:

  • If your windows software controller failed to get launched, please locate to the controller installation path for the Log file.

  • If it's not a launch issue, you can export the Log file and Backup Config file in the local network.

    • For Omada Controller v5.8 or later version,

      In the Global View, go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.

    • For Omada Controller v5.6 or v5.7, 

      Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export  for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.

    • For Omada Controller v5.5 or previous version,

      Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file . Go to Settings > Services > Export Data > Running Log to export the Log file.

 

Update Log

 

Feb 22nd, 2024:

Update the OC200 v1/v2 and OC300 v1 beta firmware to official release.

  • Before

    OC200(UN)_V1_1.28.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24

    OC200(UN)_V2_2.13.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24
    OC300(UN)_V1_1.21.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24

  • After

   OC200(UN)_V1_1.28.2 Build 20240110  (Built-in Omada SDN Controller 5.13.24)

   OC200(UN)_V2_2.13.2 Build 20240110 (Built-in Omada SDN Controller 5.13.24 )

   OC300(UN)_V1_1.21.2 Build 20240110 (Built-in Omada SDN Controller 5.13.24 )

 

Nov 23rd, 2023:

Update the Omada Software Controller beta version to official release.

  • Before

    Omada_SDN_Controller_V5.13.22_Windows(Beta)

    Omada_SDN_Controller_v5.13.10_Linux_x64.deb(Beta)

    Omada_SDN_Controller_v5.13.10_Linux_x64.tar.gz(Beta)

  • After

    Omada_SDN_Controller_V5.13.22_Windows              

    Omada_SDN_Controller_v5.13.22_Linux_x64.deb    

    Omada_SDN_Controller_v5.13.22_Linux_x64.tar.gz

 

Nov 21st, 2023:

Add the following controller firmware for early access.

  • OC200(UN)_V1_1.28.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24
  • OC200(UN)_V2_2.13.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24
  • OC300(UN)_V1_1.21.1_Build 20231117 (Beta) > Built-in Omada SDN Controller 5.13.24

 

Nov 3rd, 2023:

Update the newer Windows Omada Software Controller beta version.

  • Before

    Omada_SDN_Controller_V5.13.9_Windows(Beta)

  • After

    Omada_SDN_Controller_V5.13.22_Windows(Beta)

 

Oct 27th, 2023:

Add the following controller firmware for early access.

  • Omada_SDN_Controller_v5.13.10_Linux_x64.deb(Beta)
  • Omada_SDN_Controller_v5.13.10_Linux_x64.tar.gz(Beta)

 

Oct 8th, 2023:

Provide the following controller firmware for early access.

  • Omada_SDN_Controller_V5.13.9_Windows(Beta)

 

 

Recommended Threads

 

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  5      
 
  5      
 
#1
Options
1 Accepted Solution
Re:Omada SDN Controller_V5.13 Beta (Updated on Nov 23rd, 2023) -Solution
2024-02-23 02:28:09 - last edited 2024-02-23 02:28:23

Update as of Feb 22, 2024:

 

Thank you all for your valuable feedback on the Omada SDN Controller V5.13 Beta!

 

The 5.13 beta has been updated to official release, and this early access post is locked for further replies.

 

Any further questions or assistance needed with Omada SDN Controller, please feel free to contact TP-Link Tech Support by submitting a support ticket or connect with community by clicking Start a New Thread in the Business Community forums.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#139
Options
130 Reply
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-09 04:03:25 - last edited 2023-10-09 16:51:05

I upgraded from Software controller version 5.12.7. Upgrade went fine. I've noticed 5.13.9 does not connect to the Cloud, so I can only access the web UI from the PC running the Omada controller software. Didn't see this noted within the release notes above. Per the Notes, Item #4, the Omada controller is expected to be accessible from the Cloud...I can tell you that it is not after the upgrade to 5.13.9. Attempting to launch the controller from the Cloud results in a 404 Error. 

 

Also, the link labels are still off within the Map area. Incorrect port numbers are identified with connections between Jetstream switches when LAG LACP is utilized. 

Hybrid OPNsense/Omada EAP Cat6 backhaul 4 x EAP670 1 x EAP610-Outdoor Omada Controller v5.15.6.4 Win 11x64 Router: OPNsense Intel N5105 quad-core I226V 2.5Gbe w/16GB RAM Dual WAN Fios/Spectrum 1Gbps
  0  
  0  
#2
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-10 02:02:45

Hello @Shoresy，

 

Shoresy wrote

I upgraded from Software controller version 5.12.7. Upgrade went fine. I've noticed 5.13.9 does not connect to the Cloud, so I can only access the web UI from the PC running the Omada controller software. Didn't see this noted within the release notes above. Per the Notes, Item #4, the Omada controller is expected to be accessible from the Cloud...I can tell you that it is not after the upgrade to 5.13.9. Attempting to launch the controller from the Cloud results in a 404 Error. 

 

Thanks for your valuable feedback!

After confirming with the support team, the controller 5.13.9 Beta firmware didn't support Cloud access yet, I have corrected it in the original post.

 

Shoresy wrote

Also, the link labels are still off within the Map area. Incorrect port numbers are identified with connections between Jetstream switches when LAG LACP is utilized. 

 

Could you share some screenshots of the displayed issue for us?

And what is your full Network Layout like?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#3
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-10 12:33:07

  @Hank21 

 

Finally, DPI is coming around...  This is great news!  

I can not teach anyone anything - I can only make them think - Socrates
  1  
  1  
#4
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-10 12:59:39 - last edited 2023-10-10 13:05:01

  @Hank21 

 

My network layout is fairly simple (no VLANs)...I have an OPNsense router/firewall connected to a TL-SG2428P Jetstream switch via LACP LAG (which is the root node on my network), and a number of Jetstream switches connected behind that switch throughout my LAN. These include a SG2210P, SG2008P, and a SG2218 switch. I also have several EAP's on the network - 4 EAP670's and 1 EAP610-Outdoor. 

 

I've pasted my network topology diagram from the Omada controller - you can see the issue with the mapping and the ports identified. The diagram shows all sorts of devices connected to the same port (#2) on the SG2428P switch. 

 

5f691907e4fa4349be4d4c737e970a8a

Hybrid OPNsense/Omada EAP Cat6 backhaul 4 x EAP670 1 x EAP610-Outdoor Omada Controller v5.15.6.4 Win 11x64 Router: OPNsense Intel N5105 quad-core I226V 2.5Gbe w/16GB RAM Dual WAN Fios/Spectrum 1Gbps
  0  
  0  
#5
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-13 08:45:29

Hello @Shoresy,

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID231021739, please check your email box and ensure the support email is well received. Thanks!

Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.


Many thanks for your great cooperation and patience!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#6
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-14 08:40:04 - last edited 2023-10-14 08:46:04

@Hank21  

@Shoresy 

 

I like the alpha numeric for voucher code.

 

I seems ER605 is not supported by DPI.

 

Hope that v5.13 can be viewed in cloud.  The work around I did to access the controller is I use AnyDesk.

 

This is a great improvements from TP Link.

 

  0  
  0  
#7
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-15 11:04:17

  @Hank21 

Hi there :)

 

there is still a translation mistake in the German language.

 

In many settings you used the translation "verleugnen" for "deny" in Omada. 

But "verleugnen" means "disavow/disown"

 

Yes, the German word "verleugnen" could be translated as "deny", but the correct translation is "verweigern". Especially in the IT.

  1  
  1  
#8
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-16 07:52:21 - last edited 2023-10-17 01:37:18

Hello @mainkowitsch,

 

Thanks for your valuable feedback.

I will report this translation mistake issue to the support team for attention.

 

Update: The R&D department will correct the translation mistake in the subsequent firmware update of the controller.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  3  
  3  
#9
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-16 07:53:58 - last edited 2023-10-16 07:58:06

Hello @KzGx1314，

 

I don't have further information of when the ER605 release the firmware to support the DPI yet. May need to keep an eye on the new device firmware release for details.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#10
Options
Re:Omada SDN Controller_V5.13 Beta (Released on Oct 8th, 2023)
2023-10-16 08:37:48

  @Hank21 

 

Noted and Thank you. :)

  0  
  0  
#11
Options
123...

Information

Helpful: 5

Views: 38841

Replies: 134

Tags

Firmware Update Official
Related Articles
Omada SDN Controller_V5.12 (Updated on Sep 20th, 2023) [Thread Closed]
30246 4
Omada Software Controller_V5.9.9_Windows (Released on Feb 22, 2023)
5159 3
Omada SDN Controller_V5.14 Pre-release (Released on Feb 29th, 2024)
8295 4
Omada SDN Controller_V5.14.20 Pre-release (Updated on May 29th, 2024)
11746 1
Omada Controller_v5.1.6_Windows For Trial (Beta Edition) - [Closed on 23 May 2022]
9350 7
Omada SDN 5.9.32 beta and OpenVPN
912 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.